Looking for help and support with EBL Flash system
- Thread starter dbrannon79
- Start date
That's what I asked, were all the bent pushrods on an intake.
The varnish from gas makes sense on the intakes, those are probably glued stuck and you bent pushrods and extracted rocker studs from the force.
The exhausts wouldn't be the ones that would stick.
Yup. we got home from dropping off the head and went straight to pulling the tank. it was full of varnish! it has the relocation kit installed with the 20 gallon tank where the spare tire should be. it cleaned up nicely with the power washer, just need to flush out the lines. it has all stainless steel lines front to back.
The machine shop also said for us to pull the side covers and inspect the lifters and cam lobes for damage. I hope all of that is still good.
The machine shop also said for us to pull the side covers and inspect the lifters and cam lobes for damage. I hope all of that is still good.
Yeah, when my son bought the truck the PO told him that he cleaned out the tank already for us, but I should have known better and at least looked down the filler neck with a bore scope. I honestly didn't realize just how long it had sat.
