Search results

>> What about leaving the rear dumbs as they are but replacing the mid drums >> with 13-inch discs? I would think the mid discs would brake harder than >> rear drums while the rear drums would still brake some. >> *John Phillips* > John If people are replacing drum brakes Dave Lenzi’s kit for...

One fitting is 7/16 24. The other is 5/16 20. So one is an inverted flare adapter 7/16 24 x 5/16 20 and the other is 5/16 20 x 7/16 24. Most auto parts stores carry them. Locally Advance seems to carry a larger assortment than O’Riellys. Emery Stora > > Anyone have the part numbers for the...

Dolph It is great. I replaced four rear 11” disc brakes with Chevy calipers with Dave’s 13” discs on the mid axle and no brakes at all on the rear. I also replaced my P30 master cylinder with the original to give higher pressure. It is now more like braking a car than a motorhome. A huge...

In case that some of you have not noticed, there is a relatively new DOT brake fluid. It is DOT 5.1. NOTE that this is NOT a silicone based fluid. It is glycol bases and compatible with DOT3 and DOT4. DOT 4 and DOT 5.1 are both glycol-based brake fluids and are used widely in the automotive...

So, where is the picture? Emery Stora > > Shawn, > Unfortunately I could not see your picture but I can tell you that Cooperative Motor Works in Orlando puts isolator and combiner switches on it all the coaches they work on. Jim Bounds who runs it could probably get you the information > >...

The original element (at least in my 1977 Kingsley) is a square flange mount with 4 bolts in the corners that bolt to a matching flange on the water heater. A gasket fits between the flanges. More modern heating elements have screw threads. One can purchase an adapter flange which has a...

Tom Sorry, but the wattage is 1/4 if you run a 240 volt element on 120 volts. So a 240 volt 4000 watt element running on 120 volts would put out 1000 watts. Emery Stora >> From: Gmclist on behalf of Thomas >> Phipps >> Sent: Saturday, October 13, 2018 20:28 >> To: gmclist >> Subject: Re...

There is often a problem with the diaphragm in the pump which can easily be replaced. Emery Stora 77 Kingsley Frederick, CO > > Thanks Matt. I have the 2088 ShurFlo pump in there. Don't know the actual date of installation. It didn't freeze, since last year and this i did > get everything...

Yes, Basil Hayden should work extremely well as long as he doesn’t accidentally pour it into his gasoline tank! :) Emery Stora > > Sea foam for the vehicle. > > Basil Hayden smooths out the driver nicely. > > Sent from my iPad > >> >> My GMC Parts Chaser spends a lot of time sitting...

Jon Down at the bottom of the wiring diagram is a section called: Circuit Identification. The first item say AS thru EZ and those are just connection points in the harness assembly connection block. Your CX would be one of the connection points on that large connection block.It says it is a 40...

That is not actually a voltage regulator. It is a battery charger. There are two reasons to remove it. 1. It is a very slow charger and it will not put much current into the house battery. The battery charger / smart charger / buzz box that you have will charge the battery much faster and it...

Have you done anything with your rail awning lately? The rear top lights have usually been wired backwards by the factory. They have the hot lead going to the shell of the lights and the ground wire going to the bulb. Since the shell is screwed down to the fiberglass panel it didn’t cause any...

Sorry, Johnny. I am not an officer of FMCA. I believe James Hupy may be who you are thinking of. Emery Stora 77 Kingsley Frederick, CO > > Emery - > Assuming the roadside assistance does cover my coach, how do I get the person who answered the phone to understand this? She was polite, nice, >...

I believe that he means that if you google “anti-feedback for 10, 12, 17 and 27SI” you will find things that appear to be similar to your APC Emery Stora 77 Kingsley Frederick, CO > > anti-feedback for 10, 12, 17 and 27SI.

It appears that most of the replies I am getting is that I should change to a 30 amp cable. I am not interested in doing that. I am merely trying to find an original cable which is actually a 40 amp cable. Even though the plug is the same as a 50 amp, the cable is marked as a 40 amp. Emery...

> > Clearing out extra GMC stuff. One way is to put the parts you bought years ago on. I have two 80mm calipers, and two hoses on the shelf. All are new. The hoses are Wagner part number F110425, and BH110424. They look correct. Thanks. Bob Dunahugh Autozone numbers are Left 77320 and Right...

Thanks, Rick. An excellent suggestion that I will use if I don’t find a cable with a molded plug. Emery Stora > > Emery, > > If you don’t get a response, order a 50-amp appliance pigtail—they are > readily available from supply houses with all four wires of the same gauge. > Run that to...

My power cable has torn in the middle. Does anyone have a 50 (40) amp power cable for a GMC motorhome that they would sell to me? I know some of you have replaced yours with a 30 amp cable or perhaps from a GMC you are parting out. Please let me know. Thanks. Emery Stora 77 Kingsley...

Maybe you want to include your master cylinder, wheel cylinders and calipers. Or even your air conditioning compressor! Emery Stora 77 Kingsley Frederick, CO Emery > > Good catch! > -- > John Lebetski > Woodstock, IL > 77 Eleganza II > > > _______________________________________________...

Jim Kanomata at Applied GMC has replacement carbs for the Onan. Emery Stora 77 Kingsley Frederick, CO > > I'll give them a call. I wonder if there is a modern carb that would do the job. I wonder if there is anyone still working at Walbro that was around > when the LMB-185 was being...