Very nice Gary. As many times as I have been next to your coach, that is
one detail I have not noticed.
> Hi, Not stainless but used the same size in aluminum. Rounded the edges
> with
> a router then had them powder coated in silver to match the rest of the
> beltline front and back. Applied a 7/8" rub strip in blue to cover the bolt
> holes. Stainless would be a b**ch to work with on something like this. Lots
> of holes to drill and the polishing would be tough unless it came
> pre-polished which would cost you a fortune.
>
> Here is a picture.
>
> http://tinyurl.com/6vsxr9v
>
> Thanks
>
> Gary and Joanne Worobec
> 1973 GMC Glacier
> Anza, CA
>
>
> ----- Original Message -----
> From: "steve & debbie"
> To:
> Sent: Wednesday, January 11, 2012 4:20 PM
> Subject: [GMCnet] stainless steel belt line ??
>
>
> >
> >
> > Hello,
> > Noticed that you can get stainless steel bar in 2" widths, and 12'
> > lengths. Just pondering on using polished SS bar, for the sides instead
> of
> > the plastic/rubber OEM stuff.
> > One would think it would look very classy, all polished up...
> >
> > Wonder if anyone has used SS bar if so any photos ????
> >
> > cheers and beers
> > --
> > Steve & Debbie
> > Monticello, FL
> > 77 Palm Beach :- Aurora
> > EX G4WDT
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Fathom the hypocrisy of a nation where every citizen must prove they have
health insurance......but not everyone has to prove they're a citizen.
Steve Ferguson
Sierra Vista, AZ
one detail I have not noticed.
> Hi, Not stainless but used the same size in aluminum. Rounded the edges
> with
> a router then had them powder coated in silver to match the rest of the
> beltline front and back. Applied a 7/8" rub strip in blue to cover the bolt
> holes. Stainless would be a b**ch to work with on something like this. Lots
> of holes to drill and the polishing would be tough unless it came
> pre-polished which would cost you a fortune.
>
> Here is a picture.
>
> http://tinyurl.com/6vsxr9v
>
> Thanks
>
> Gary and Joanne Worobec
> 1973 GMC Glacier
> Anza, CA
>
>
> ----- Original Message -----
> From: "steve & debbie"
> To:
> Sent: Wednesday, January 11, 2012 4:20 PM
> Subject: [GMCnet] stainless steel belt line ??
>
>
> >
> >
> > Hello,
> > Noticed that you can get stainless steel bar in 2" widths, and 12'
> > lengths. Just pondering on using polished SS bar, for the sides instead
> of
> > the plastic/rubber OEM stuff.
> > One would think it would look very classy, all polished up...
> >
> > Wonder if anyone has used SS bar if so any photos ????
> >
> > cheers and beers
> > --
> > Steve & Debbie
> > Monticello, FL
> > 77 Palm Beach :- Aurora
> > EX G4WDT
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Fathom the hypocrisy of a nation where every citizen must prove they have
health insurance......but not everyone has to prove they're a citizen.
Steve Ferguson
Sierra Vista, AZ