Replacement sideview mirrors

D

david1

New member
Jul 29, 2007
452
0
0
Hey all happy holidays wondering what the options are for side view mirror replacements I have a 78 and the mounting bolts look like they don't fit
anything even the Ramco's bilt pattern. I'm wondering has anyone found something that will bolt onto the existing mounting bolts/nuts? I see on
applied site there is an option for 78 GMC how's the base machine? Is it just drilled out? Does anyone have a picture of what they look like before
mounting? Does the mount look clean or is it evident that they've been modified?
-Dave
--
'78 Palm Beach. car nut new to RV'ing 26 ft. 403 rebuilt in 2018, rebuilt tranny in 2014, Dave Lenzi knuckles & hubs, yada yada yada OEM chromed
wheels,Green Brady Bunch stock
 
Dave,
The bolt patern are ALL the same.
77-78 has a stud atached to the body so the arm has a seat machined, the
other years require an arm with counter sink.

> Hey all happy holidays wondering what the options are for side view mirror
> replacements I have a 78 and the mounting bolts look like they don't fit
> anything even the Ramco's bilt pattern. I'm wondering has anyone found
> something that will bolt onto the existing mounting bolts/nuts? I see on
> applied site there is an option for 78 GMC how's the base machine? Is it
> just drilled out? Does anyone have a picture of what they look like before
> mounting? Does the mount look clean or is it evident that they've been
> modified?
> -Dave
> --
> '78 Palm Beach. car nut new to RV'ing 26 ft. 403 rebuilt in 2018, rebuilt
> tranny in 2014, Dave Lenzi knuckles & hubs, yada yada yada OEM chromed
> wheels,Green Brady Bunch stock
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
 
Yes it is clean as the arm is made for the GMC MH.

> Dave,
> The bolt patern are ALL the same.
> 77-78 has a stud atached to the body so the arm has a seat machined, the
> other years require an arm with counter sink.
>

>
>> Hey all happy holidays wondering what the options are for side view
>> mirror replacements I have a 78 and the mounting bolts look like they don't
>> fit
>> anything even the Ramco's bilt pattern. I'm wondering has anyone found
>> something that will bolt onto the existing mounting bolts/nuts? I see on
>> applied site there is an option for 78 GMC how's the base machine? Is it
>> just drilled out? Does anyone have a picture of what they look like before
>> mounting? Does the mount look clean or is it evident that they've been
>> modified?
>> -Dave
>> --
>> '78 Palm Beach. car nut new to RV'ing 26 ft. 403 rebuilt in 2018, rebuilt
>> tranny in 2014, Dave Lenzi knuckles & hubs, yada yada yada OEM chromed
>> wheels,Green Brady Bunch stock
>>
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
> --
> Jim Kanomata
> Applied/GMC, Newark,CA
> jimk
> http://www.appliedgmc.com
> 1-800-752-7502
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
 
I have had Ramcos for years. They the fit with no modifications. I assume that still offer them. Ask Jim K. for sure.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
 
Both my coaches have/had Ramcos. The 23' never had the wires hooked up. I didn't realize they were electric till I took the plate off the arm and
found the wires. I assume the NO (Next Owner, in this case Mike Briere) put a switch or two on the armrest and is using them.

--johnny
--
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
"I forgive them all, save those who hurt the dogs. They must answer to me in hell" - ol Andy, paraphrased
 
There were arms for the Ramco mirrors made for the GMC
JmK maybe the only source, other than a parts coach.
Velerac (sp?) is another excellent brand.
These after market parts are hard to find.
Tom
--
2012 Phoenix Cruiser model 2552
KA4CSG
 
All parts for the Ramco mirrors are available from Ramco. See below:

https://www.ramco-eng.com/mirror-support

That said, you will get the best pricing and service from Jim K at Applied GMC for complete mirrors and parts for your repair needs! I got the 9-pin switches from him at a fair price and very good delivery!

JR Wright
GMC GreatLaker
GMCMI
GMC Eastern States
Michigan
On Location inTucson

>
> There were arms for the Ramco mirrors made for the GMC
> JmK maybe the only source, other than a parts coach.
> Velerac (sp?) is another excellent brand.
> These after market parts are hard to find.
> Tom
> --
> 2012 Phoenix Cruiser model 2552
> KA4CSG
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
 
I got mine from Applied GMC. Fit great. Jim suggested the ones with the turn signal light built into the base. I've been extremely grateful for that suggestion that Jim mentioned . Great safety upgrade. And cheep. Bob Dunahugh
 
I just wish the arms would fold in as well if you need to get through a narrow spot, but I think they're the best out there and the remote control is
nice to have when adjusting your side view mirrors.
--
George Rudawsky
Chicago, IL
75 Palm Beach
 
I hope Jim responds and maybe some of the members can post pictures of the brackets and nuts for a 78. Merry Christmas happy holidays
--
'78 Palm Beach. car nut new to RV'ing 26 ft. 403 rebuilt in 2018, rebuilt tranny in 2014, Dave Lenzi knuckles & hubs, yada yada yada OEM chromed
wheels,Green Brady Bunch stock
 
I will try to remember to look at the 78 that is parked in my hangar. Then I'll go next door and look at my 76 parked in that hangar. It will be a
couple of days before I am out there.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
 
Same bracket, just different hole seating.
77-78 uses the nut from original.
73-76 uses the origional screws

> I hope Jim responds and maybe some of the members can post pictures of the
> brackets and nuts for a 78. Merry Christmas happy holidays
> --
> '78 Palm Beach. car nut new to RV'ing 26 ft. 403 rebuilt in 2018, rebuilt
> tranny in 2014, Dave Lenzi knuckles & hubs, yada yada yada OEM chromed
> wheels,Green Brady Bunch stock
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
 
You must log in or register to reply here.
GMCMI Fall 2026 Rally
Applied GMC

Share this page

Share this page
Top Bottom
Back