Olds 455 donor engine

Keith V

Keith V

Well-known member
Mar 26, 2008
3,576
372
83
I have a non Toro 455 with a bad block, the cly bores are very rusted, it would need to be sleaved.
it has c heads, not sure if it has the good valve covers, not a Toro intake, crank may be OK

I'm planning on selling the heads and valve covers unless they are the good one and scrapping the rest

is there anything else I should salvage?

Keith Vasilakes
Mounds View MN
76 exRoyale
MicroLevelhttp://www.gmcmotorhomemarketplace.com/vasilakes/microlevel_intro.pdf
 
Yes, the cam gallery plug on the rear of the block. It has a lube hole to
lube the distributor drive gear. Specific to the 455.
Jim Hupy
Salem, Oregon

> I have a non Toro 455 with a bad block, the cly bores are very rusted, it
> would need to be sleaved.
> it has c heads, not sure if it has the good valve covers, not a Toro
> intake, crank may be OK
>
> I'm planning on selling the heads and valve covers unless they are the
> good one and scrapping the rest
>
> is there anything else I should salvage?
>
> Keith Vasilakes
> Mounds View MN
> 76 exRoyale
> MicroLevel<
> http://www.gmcmotorhomemarketplace.com/vasilakes/microlevel_intro.pdf>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
 
Valve covers are valuable, intake manifold,
Jim Kanomata ASE
Applied GMC RV

> Yes, the cam gallery plug on the rear of the block. It has a lube hole to
> lube the distributor drive gear. Specific to the 455.
> Jim Hupy
> Salem, Oregon
>

>
> > I have a non Toro 455 with a bad block, the cly bores are very rusted, it
> > would need to be sleaved.
> > it has c heads, not sure if it has the good valve covers, not a Toro
> > intake, crank may be OK
> >
> > I'm planning on selling the heads and valve covers unless they are the
> > good one and scrapping the rest
> >
> > is there anything else I should salvage?
> >
> > Keith Vasilakes
> > Mounds View MN
> > 76 exRoyale
> > MicroLevel<
> > http://www.gmcmotorhomemarketplace.com/vasilakes/microlevel_intro.pdf>
> >
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>

--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk
http://www.gmcrvparts.com
1-800-752-7502
 
If it is a non Toro and not from a GMC isn't the starter mounted on the
driver's side?

> Valve covers are valuable, intake manifold,
> Jim Kanomata ASE
> Applied GMC RV
>
>

>
> > Yes, the cam gallery plug on the rear of the block. It has a lube hole to
> > lube the distributor drive gear. Specific to the 455.
> > Jim Hupy
> > Salem, Oregon
> >

> >
> > > I have a non Toro 455 with a bad block, the cly bores are very rusted,
> it
> > > would need to be sleaved.
> > > it has c heads, not sure if it has the good valve covers, not a Toro
> > > intake, crank may be OK
> > >
> > > I'm planning on selling the heads and valve covers unless they are the
> > > good one and scrapping the rest
> > >
> > > is there anything else I should salvage?
> > >
> > > Keith Vasilakes
> > > Mounds View MN
> > > 76 exRoyale
> > > MicroLevel<
> > > http://www.gmcmotorhomemarketplace.com/vasilakes/microlevel_intro.pdf>
> > >
> > >
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> >
>
>
> --
> Jim Kanomata ASE
> Applied/GMC, Newark,CA
> jimk
> http://www.gmcrvparts.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>

--
Bruce Hart
1976 Palm Beach
LaGrange, Wyoming
GMC=Genetically Modified Chevy
 
Starter is on the driver side and mounts to the block.
Toronado mounts on the trans on the passanger side,
Oilpan needs to be for the Toro,

> If it is a non Toro and not from a GMC isn't the starter mounted on the
> driver's side?
>
> On Thu, Jun 9, 2022 at 11:02 AM Jim Kanomata

>
> > Valve covers are valuable, intake manifold,
> > Jim Kanomata ASE
> > Applied GMC RV
> >
> >

> >
> > > Yes, the cam gallery plug on the rear of the block. It has a lube hole
> to
> > > lube the distributor drive gear. Specific to the 455.
> > > Jim Hupy
> > > Salem, Oregon
> > >

> > >
> > > > I have a non Toro 455 with a bad block, the cly bores are very
> rusted,
> > it
> > > > would need to be sleaved.
> > > > it has c heads, not sure if it has the good valve covers, not a Toro
> > > > intake, crank may be OK
> > > >
> > > > I'm planning on selling the heads and valve covers unless they are
> the
> > > > good one and scrapping the rest
> > > >
> > > > is there anything else I should salvage?
> > > >
> > > > Keith Vasilakes
> > > > Mounds View MN
> > > > 76 exRoyale
> > > > MicroLevel<
> > > >
> http://www.gmcmotorhomemarketplace.com/vasilakes/microlevel_intro.pdf>
> > > >
> > > >
> > > > _______________________________________________
> > > > GMCnet mailing list
> > > > Unsubscribe or Change List Options:
> > > >
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > >
> >
> >
> > --
> > Jim Kanomata ASE
> > Applied/GMC, Newark,CA
> > jimk
> > http://www.gmcrvparts.com
> > 1-800-752-7502
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> >
>
>
> --
> Bruce Hart
> 1976 Palm Beach
> LaGrange, Wyoming
> GMC=Genetically Modified Chevy
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>

--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk
http://www.gmcrvparts.com
1-800-752-7502
 
You must log in or register to reply here.
Get your shine on at www.cruzingear.co
Applied GMC

Share this page

Share this page
Top Bottom
Back