New Page - Door Handle/Lock?

zachary zehnacker

New member
Oct 3, 1997
195
0
0
John,

Thanks for the compliments on the page and our GMC.

As far as the door handle goes, it is a stock door handle which I believe
is the same as the ones used in all later GMCs. Apparently GM originally
designed the GMC for a different door handle and had already produced doors
for it. They apparently found that the door handle was not acceptable and
redesigned it to the current handle. Unfortunately, the doors had holes in
them already for the original design, so they used the polished stainless
steel plate shown in the picture to cover all the holes. The plate has a
little GMC emblem on it which is actually the only GMC emblem on our
motorhome now. The emblem had GMC orange behind the silver letters before,
but we changed it to black when we did the paint job. The Later GMCs got
doors that had not been cut for the original handle, so the plate was no
longer necessary.

If you still want a picture of it, let me know and I'll see if I can come
up with something. Right now, though, all I have is a blow-up from that
picture which gives a good idea of what it is, but doesn't look real good.
I can email you that (about 5k) if you want, just let me know.

Zak

>Zak...
>
>Terrific job on the GMC and the new page. Do you have a close-up and/or
>more info on the door handle in the right side 'before' photo?
>
>The coach and all parts look really great.
>
>--
>Regards,
>John 74 Glacier near Washington, DC.
>
>
 
Zak...

Terrific job on the GMC and the new page. Do you have a close-up and/or
more info on the door handle in the right side 'before' photo?

The coach and all parts look really great.

- --
Regards,
John 74 Glacier near Washington, DC.
 
> Right now, though, all I have is a blow-up from that
> picture which gives a good idea of what it is, but doesn't look real >
> good. I can email you that (about 5k) if you want, just let me know.

Thanks but it is not necessary now. Your description was one case where
it was worth more than 1000 words or a picture. I thought you had found
a keyless entry lock, which several of us here on the net have been
looking for.

- --
Regards,
John 74 Glacier near Washington, DC.
 
Justin:

GMCMI Parts Interchange Index says the entrance door latch assembly is
Peterbilt # 20-08229-R.

Paul Bartz

From: CHill113 [mailto:CHill113]
Sent: Wednesday, December 30, 1998 8:12 PM
Subject: Re: GMC: New Page - Door Handle/Lock?

I haven't been following this conversation because of Christmas holidays
etc. If you are asking about the GMC door handle, take a look at either a
Peterbilt or Kenworth truck. One of them seems to have one just like it.
May be some internal differences, but looks the same.,
Justin