Door Lock
- Thread starter gary m
- Start date
Tell em it's for a Kenworth
bdub
On Tue, Sep 24, 2019, 11:16 AM Gary M via Gmclist
wrote:
> I am trying to find a part number for a replacement door lock cylinder for
> my 77 Royale. None of the parts houses around here can find one that
> matches the one currently in it. Any assistance would be great.
> --
> 77 Royale
>
bdub
On Tue, Sep 24, 2019, 11:16 AM Gary M via Gmclist
wrote:
> I am trying to find a part number for a replacement door lock cylinder for
> my 77 Royale. None of the parts houses around here can find one that
> matches the one currently in it. Any assistance would be great.
> --
> 77 Royale
>
Tumbler is a GM see if Jim B at Coop has them. if not we can supply.
On Tue, Sep 24, 2019 at 9:30 AM Billy Massey via Gmclist <
> Tell em it's for a Kenworth
>
> bdub
>
>
> On Tue, Sep 24, 2019, 11:16 AM Gary M via Gmclist >
>
> > I am trying to find a part number for a replacement door lock cylinder
> for
> > my 77 Royale. None of the parts houses around here can find one that
> > matches the one currently in it. Any assistance would be great.
> > --
> > 77 Royale
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
On Tue, Sep 24, 2019 at 9:30 AM Billy Massey via Gmclist <
> Tell em it's for a Kenworth
>
> bdub
>
>
> On Tue, Sep 24, 2019, 11:16 AM Gary M via Gmclist >
>
> > I am trying to find a part number for a replacement door lock cylinder
> for
> > my 77 Royale. None of the parts houses around here can find one that
> > matches the one currently in it. Any assistance would be great.
> > --
> > 77 Royale
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
The latch mechanism is, as Billy says, a Kenworth but it takes a GM tumbler. Any good locksmith can assist you or you might check Applied GMC or other GMC shops.
Emery Stora
77 Kingsley
Frederick CO
> On Tue, Sep 24, 2019 at 9:30 AM Billy Massey via Gmclist <
>
>> Tell em it's for a Kenworth
>>
>> bdub
>>
>>
>> On Tue, Sep 24, 2019, 11:16 AM Gary M via Gmclist >>
>>
>>> I am trying to find a part number for a replacement door lock cylinder
>> for
>>> my 77 Royale. None of the parts houses around here can find one that
>>> matches the one currently in it. Any assistance would be great.
>>> --
>>> 77 Royale
Emery Stora
77 Kingsley
Frederick CO
> On Tue, Sep 24, 2019 at 9:30 AM Billy Massey via Gmclist <
>
>> Tell em it's for a Kenworth
>>
>> bdub
>>
>>
>> On Tue, Sep 24, 2019, 11:16 AM Gary M via Gmclist >>
>>
>>> I am trying to find a part number for a replacement door lock cylinder
>> for
>>> my 77 Royale. None of the parts houses around here can find one that
>>> matches the one currently in it. Any assistance would be great.
>>> --
>>> 77 Royale
> Tell em it's for a Kenworth
>
> bdub
According to my records, I replaced the door latch with a "Peterbilt Door Latch #20-08229R" for $39.82. That was April 2007.
I bought it at this place which is off I75.
Reefer Peterbilt
2645 Auburn Road
Auburn Hills, MI 48326
Tel (248) 852-8300
Maybe Kenworth and Peterbilt parts are the same now?
>
> bdub
According to my records, I replaced the door latch with a "Peterbilt Door Latch #20-08229R" for $39.82. That was April 2007.
I bought it at this place which is off I75.
Reefer Peterbilt
2645 Auburn Road
Auburn Hills, MI 48326
Tel (248) 852-8300
Maybe Kenworth and Peterbilt parts are the same now?
> > Tell em it's for a Kenworth
> >
> > bdub
>
> According to my records, I replaced the door latch with a "Peterbilt Door Latch #20-08229R" for $39.82. That was April 2007.
>
> I bought it at this place which is off I75.
> Reefer Peterbilt
> 2645 Auburn Road
> Auburn Hills, MI 48326
> Tel (248) 852-8300
>
> Maybe Kenworth and Peterbilt parts are the same now?
Seems that I posted this from an GMCNET account I forgot I had. Thanks LASTPASS.
--
Richard
76 Palm Beach
SE Michigan
www.PalmBeachGMC.com
Coop Roller Cam 455, Howell TBI + EBL, 3.42 FD, Quadra Bag, Macerator, Lenzi stuff, Manny Tranny etc.
> >
> > bdub
>
> According to my records, I replaced the door latch with a "Peterbilt Door Latch #20-08229R" for $39.82. That was April 2007.
>
> I bought it at this place which is off I75.
> Reefer Peterbilt
> 2645 Auburn Road
> Auburn Hills, MI 48326
> Tel (248) 852-8300
>
> Maybe Kenworth and Peterbilt parts are the same now?
Seems that I posted this from an GMCNET account I forgot I had. Thanks LASTPASS.
--
Richard
76 Palm Beach
SE Michigan
www.PalmBeachGMC.com
Coop Roller Cam 455, Howell TBI + EBL, 3.42 FD, Quadra Bag, Macerator, Lenzi stuff, Manny Tranny etc.
Learn to use the knowledge of people that know.
Reach out to Jim B at Coop as he is on top of that, or call me for
asssistace.
On Tue, Sep 24, 2019 at 10:29 AM RJW via Gmclist
wrote:
> > > Tell em it's for a Kenworth
> > >
> > > bdub
> >
> > According to my records, I replaced the door latch with a "Peterbilt
> Door Latch #20-08229R" for $39.82. That was April 2007.
> >
> > I bought it at this place which is off I75.
> > Reefer Peterbilt
> > 2645 Auburn Road
> > Auburn Hills, MI 48326
> > Tel (248) 852-8300
> >
> > Maybe Kenworth and Peterbilt parts are the same now?
>
> Seems that I posted this from an GMCNET account I forgot I had. Thanks
> LASTPASS.
>
> --
> Richard
> 76 Palm Beach
> SE Michigan
> www.PalmBeachGMC.com
>
>
> Coop Roller Cam 455, Howell TBI + EBL, 3.42 FD, Quadra Bag, Macerator,
> Lenzi stuff, Manny Tranny etc.
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
Reach out to Jim B at Coop as he is on top of that, or call me for
asssistace.
On Tue, Sep 24, 2019 at 10:29 AM RJW via Gmclist
wrote:
> > > Tell em it's for a Kenworth
> > >
> > > bdub
> >
> > According to my records, I replaced the door latch with a "Peterbilt
> Door Latch #20-08229R" for $39.82. That was April 2007.
> >
> > I bought it at this place which is off I75.
> > Reefer Peterbilt
> > 2645 Auburn Road
> > Auburn Hills, MI 48326
> > Tel (248) 852-8300
> >
> > Maybe Kenworth and Peterbilt parts are the same now?
>
> Seems that I posted this from an GMCNET account I forgot I had. Thanks
> LASTPASS.
>
> --
> Richard
> 76 Palm Beach
> SE Michigan
> www.PalmBeachGMC.com
>
>
> Coop Roller Cam 455, Howell TBI + EBL, 3.42 FD, Quadra Bag, Macerator,
> Lenzi stuff, Manny Tranny etc.
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
If you just want the cylinder and not the latch, my 76 was a plain GM cylinder and I got it (in stock) from AutoZone with two new keys. It was cheap.
If you need to re-key it to match other locks in the coach, Just about any locksmith can do it in a matter of minutes.
The grooves down the side of the key changed by year. If you are re-keying it, then you need to match the new cylinder to your existing key when you
buy it.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
If you need to re-key it to match other locks in the coach, Just about any locksmith can do it in a matter of minutes.
The grooves down the side of the key changed by year. If you are re-keying it, then you need to match the new cylinder to your existing key when you
buy it.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
That description entered into Google brings up a lot of photos of a
complete latch -- NOT a lock cylinder. And it apparently doesn't even
include a handle.
Ken H.
On Tue, Sep 24, 2019 at 1:23 PM 76 via Gmclist
wrote:
> > Tell em it's for a Kenworth
> >
> > bdub
>
> According to my records, I replaced the door latch with a "Peterbilt Door
> Latch #20-08229R" for $39.82. That was April 2007.
>
> I bought it at this place which is off I75.
> Reefer Peterbilt
> 2645 Auburn Road
> Auburn Hills, MI 48326
> Tel (248) 852-8300
>
> Maybe Kenworth and Peterbilt parts are the same now?
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
complete latch -- NOT a lock cylinder. And it apparently doesn't even
include a handle.
Ken H.
On Tue, Sep 24, 2019 at 1:23 PM 76 via Gmclist
wrote:
> > Tell em it's for a Kenworth
> >
> > bdub
>
> According to my records, I replaced the door latch with a "Peterbilt Door
> Latch #20-08229R" for $39.82. That was April 2007.
>
> I bought it at this place which is off I75.
> Reefer Peterbilt
> 2645 Auburn Road
> Auburn Hills, MI 48326
> Tel (248) 852-8300
>
> Maybe Kenworth and Peterbilt parts are the same now?
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
Push the lock down, hold the outside door in the "Open" position while
slamming the door. Or better yet, close the door with keys in your hand,
and lock it with the key. Then, you never lock your keys inside, with you
on the outside. BTDT.
Jim Hupy
Salem, Oregon
On Tue, Sep 24, 2019, 2:14 PM Kevin via Gmclist
wrote:
> While we are on the subject of locks.......... What would cause the door
> not to lock when you psh the button down and close it? Usually I have to try
> a few times before it actually locks the door.
>
> K
>
>
> --
> 1977 GMC Royale 403
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
slamming the door. Or better yet, close the door with keys in your hand,
and lock it with the key. Then, you never lock your keys inside, with you
on the outside. BTDT.
Jim Hupy
Salem, Oregon
On Tue, Sep 24, 2019, 2:14 PM Kevin via Gmclist
wrote:
> While we are on the subject of locks.......... What would cause the door
> not to lock when you psh the button down and close it? Usually I have to try
> a few times before it actually locks the door.
>
> K
>
>
> --
> 1977 GMC Royale 403
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
In the shaft from the interior lock button to the latch, there's a "barrel
nut" which adjusts the length of the shaft. Careful adjustment of that nut
is necessary. It can either allow the door to be slammed and locked with
the button down (and the keys locked inside). Or, it can be set to cause
the door to unlock when the door is slammed (reminding you to get your key
and lock the door from the outside). I don't (and don't want to) know
whether pulling the outside latch while closing the door will allow it to
lock.
Ken H.
On Tue, Sep 24, 2019 at 5:14 PM Kevin via Gmclist
wrote:
> While we are on the subject of locks.......... What would cause the door
> not to lock when you psh the button down and close it? Usually I have to try
> a few times before it actually locks the door.
>
> K
>
>
> --
> 1977 GMC Royale 403
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
nut" which adjusts the length of the shaft. Careful adjustment of that nut
is necessary. It can either allow the door to be slammed and locked with
the button down (and the keys locked inside). Or, it can be set to cause
the door to unlock when the door is slammed (reminding you to get your key
and lock the door from the outside). I don't (and don't want to) know
whether pulling the outside latch while closing the door will allow it to
lock.
Ken H.
On Tue, Sep 24, 2019 at 5:14 PM Kevin via Gmclist
wrote:
> While we are on the subject of locks.......... What would cause the door
> not to lock when you psh the button down and close it? Usually I have to try
> a few times before it actually locks the door.
>
> K
>
>
> --
> 1977 GMC Royale 403
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
