403 passenger side exhaust manifold needed in midwest

I am not sure of a source for a used one... but if a new one is an option, Cinnabar should have them (in Michigan) complete with the copper gaskets.
--
Chris S. -
77 Kingsley, 3.70 FD, mostly OEM -
S.E. Michigan
 
We have good used ones for $180
and gaskets.

> I am not sure of a source for a used one... but if a new one is an option,
> Cinnabar should have them (in Michigan) complete with the copper gaskets.
> --
> Chris S. -
> 77 Kingsley, 3.70 FD, mostly OEM -
> S.E. Michigan
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
 
Not the same as a 455. Jim- good to know, but shipping at this point will take too long. Was hoping to find one within a days drive of des moines,
or we have a company in midwest that can ship about anything in 5 state area overnight for $5.

He is not stranded, just does not want to cancel his weekend plans.
--
Jon Roche
75 palm beach
St. Cloud, MN
http://lqqkatjon.blogspot.com/
 
> Midwest member had passenger side manifold for his 403 break and is effecting camping plans.
>
> Anybody know of any in the midwest? He knows headers maybe the answer but hoping to get a used manfold to be back on road quick.

Windy Hill Auto Parts in New London, Mn is showing they have one for a 1077 Toronado, their stock #42317.
--
Mike K.
'75 PB
Southeast Michigan
 
Parts are what they are. When you figure what it costs to make the mold
patterns, then set up the molds, melt the iron and pour it, flash it,
machine the threads, and gasket surfaces, distribute it, store it, pay
overhead costs on it for 35 years, it seems cheap at twice the price. The
fact that it is even still in stock is amazing to me. But, there is still
headers from several sources available. Bet they don't exactly match up
with your exhaust flanges, though. So there is another delay and expense.
Week end is looking closer all the time.
Jim Hupy
Salem, Or
78 GMC ROYALE 403

> Windy Hill is pretty proud of that header. Unfortunate because they are
> just down the road.
>
>
> --
> Jon Roche
> 75 palm beach
> St. Cloud, MN
> http://lqqkatjon.blogspot.com/
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
 
​455 is different than 403 .​

> > Midwest member had passenger side manifold for his 403 break and is
> effecting camping plans.
> >
> > Anybody know of any in the midwest? He knows headers maybe the answer
> but hoping to get a used manfold to be back on road quick.
>
>
> Windy Hill Auto Parts in New London, Mn is showing they have one for a
> 1077 Toronado, their stock #42317.
> --
> Mike K.
> '75 PB
> Southeast Michigan
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
 
G'day,

I do a search for GMC's and parts daily and over the years have built up a nice group of spares at a reasonable cost. When I can no
longer drive my GMC I'll sell them and make a few bucks.

Regards,
Rob M.
Sydney, Australia
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
USA '77 Kingsley - TZE 267V100808

-----Original Message-----
From: Gmclist [mailto:gmclist-bounces] On Behalf Of James Hupy
Sent: Wednesday, July 26, 2017 3:41 AM
To: gmclist
Subject: Re: [GMCnet] 403 passenger side exhaust manifold needed in midwest

Parts are what they are. When you figure what it costs to make the mold
patterns, then set up the molds, melt the iron and pour it, flash it,
machine the threads, and gasket surfaces, distribute it, store it, pay
overhead costs on it for 35 years, it seems cheap at twice the price. The
fact that it is even still in stock is amazing to me. But, there is still
headers from several sources available. Bet they don't exactly match up
with your exhaust flanges, though. So there is another delay and expense.
Week end is looking closer all the time.
Jim Hupy
Salem, Or
78 GMC ROYALE 403
 
Sorry I can't help out with the manifold, but "lqqkatjon" can you tell me more about the company in the midwest that can ship about anything in a 5
state area overnight for $5?
--
Ty Hardiman, Norman, OK / Member FMCA-GMCMI-GMC Classics / August 1977 Kingsley TZE167V102390 / 26' / 403 / 3.55 / 16" Wheels / Quadrajet / HEI /
Previous Owners: Basil LeBlanc, Dan Ramker / Original Owner: William Strahm, Loveland, CO
 
That http://www.speedeedelivery.com/ service sounds great. I'd love to find a similar service that includes Oklahoma & Texas. Thanks for the info.

Hope a 403 manifold turns up for the midwest member in time for their trip.
--
Ty Hardiman, Norman, OK / Member FMCA-GMCMI-GMC Classics / August 1977 Kingsley TZE167V102390 / 26' / 403 / 3.55 / 16" Wheels / Quadrajet / HEI /
Previous Owners: Basil LeBlanc, Dan Ramker / Original Owner: William Strahm, Loveland, CO
 
You must log in or register to reply here.
Applied GMC
GMCMI Fall 2026 Rally

Share this page

Share this page
Top Bottom
Back