Search results

Mike I am so sorry to hear of your medical problems. I have really enjoyed communicating with you over the years. I had hoped to take my GMC to Nova Scotia and visit with you. I may still do that. My best for your future. Emery Stora 77 Kingsley Frederick, CO > > Do tell, i'd love to see...

You won’t find any in a junkyard. Jim Kanomata of Applied GMC developed it and modifies a standard final drive with different gears. Contact him at 800-752-7502. Emery Stora 77 Kingsley Frederick, CO > > Its for a off road project im working on using the th425 trans. > >...

Are you using the Gene Fisher UPC cable attached to the alternator? Emery Stora > >> Emory, it happened with both alternators. >> Will check the fuse next, >> Ken, checked voltage at center post of isolator. Will follow up with >> connector. >> >> Bruce Hart >> 1976 Palm Beach >> Milliken...

15’u volts seems a bit high unless your battery might be completely dead. After a short time the voltage should drop to perhaps the high 14s. A generator light on all the time is usually associated with the diode trio inside the alternator. It may have tested right but there still could be a...

I am tired of having my emails to the GMC list go through signed delbert lecky instead of Emery Stora. I don’t know if someone started that as a gag but its gone on too long. If the list manager cannot fix the problem I guess I’ll have to change my email name and see if that will take care of...

Reach in with wire snips and cut the wires. You’ll need a different plug for your new furnace anyway. Take out the fuse before cutting or you’ll blow the fuse. Emery Stora 77 Kingsley Frederick, CO > > > OK, i give up, how do I get the wiring plug off this Bleepin' Duotherm > furnace? 78...

> > Emery, > Squinting at the 77-78 Transmode diagram for a while, I see both park/turn lamps have a separate ground wire (18ga black) running to the "electrical > equip. panel ground", which I think is that aluminum plate under the right front hatch where the boost solenoid is mounted. Diagram...

I recently installed Dave Lenzi’s new rear disk brake kit. I had a 4 wheel disk brake from TSM (The Streetrod Mfg. CO) It has worked well but it had 11 inch disks and Dave’s has a 13 inch disk with dual piston calipers — very large. It was actually designed for a large heavy truck with dual...

John You always do good work. But I am wondering if it is really necessary to go to all that expense and labor. Your parts must be exceeding $100 plus the hose. I have simply used a 3/4” garden hose for almost 20 years now. I cut it it half and attached the end with the male fitting to a 1”...

I saw those years ago you’d need an extremely large back room to store them. Emery Stora > > Yeh, if you're doing hand or gun layup They probably ought to be stacked in a back room someplace, is that the current idea? > > --johnny > > --johnny > -- > 76 26' Eleganza(?) with beaucoup mods...

don’t reply

My front turn signal, parking lights and side markers stopped working. The rears are fine. Probably a connector under the dash loosened. Anyone know where I should look? Thanks. Emery Stora 77 Kingsley Frederick, CO

HOWEVER — THIS IS NOT A SILICONE BOOT. The site says this is a neoprene rubber boot. The blue ones that Rob Mueller mentions are silicone. Emery Stora 77 Kingsley Frederick, CO > > FWIW, > I don't usually post my bargain finds here, not wanting to undercut our GMC suppliers who need to make...

Pull hard on the steering wheel in one direction or the other while trying to turn the key. This will often allow you to unlock the steering wheel. Emery Stora > > 76 Palm Beach has locked steering column and can’t turn key to unlock steering or start. Jackup up front and turned wheels all...

The information you found sounds like someone was giving a lot gobble de gook or pseudo science. I got a good laugh from it Emery Stora > > My 3.55 final drive has a little whine under load. Not enough to really DO > anything about, but slightly annoying. So I'm considering adding some MSO2...

Use of greases in connection protection seems to be a controversial topic. The most frequent Internet complaint is that dielectric grease insulates connections, making connections less conductive. Some call pure silicone grease an "insulating grease". The general basis for this claim is in the...

That is a common problem. The fan draws a lot of current and the terminal often gets some corrosion and overhears. Put som dielectric grease on the terminal after you install a new terminal. Emery Stora > > Looks like it is just a bad connection in the connector lug. I would cut the bad part...

Many of the GMCs had this small blower mounted behind on below the stove. A small 2” (?) hose led from it around the back of the motorhome and below the front edge of the water tank and connected to a vent in the side bath wall to the left of the toilet. It served to keep the water tank from...

You have a short memory. What about 3 to 7 years ago. Penn State barely broke even on win/ losses. Emery Stora Emery > > Michigan? Michigan State? You mean the teams who lose to Penn State every year? > > The PSU GMC (complete with pizza oven) https://www.youtube.com/watch?v=kbZYEnCEKgM...

Billy, Unfortunately that is not Michigan but it’s Michigan State an arch rival of Michigan!! Go Blue! Emery Stora > > Attn: Emery Stora > > > > http://www.gmcmhphotos.com/photos/tricked-out-gmcs/p65106-michigangmc.html > > > > ;-) > > bdub >