Bleepin' Duotherm furnace

Ron Clark

New member
Sep 6, 2000
1,506
0
0
North Plains, OR
OK, i give up, how do I get the wiring plug off this Bleepin' Duotherm
furnace? 78 Eleganza II
It's on the left side of the unit, in a space about 2" wide, and it's
about 6" too short to get both hands on to pull it apart.
And, Oh Yeah!, it has a release on the side of it that I can't operate.

ron

Ron & Linda Clark
1978 Eleganza II
North Plains, ORYGUN
 
Reach in with wire snips and cut the wires. You’ll need a different plug for your new furnace anyway.
Take out the fuse before cutting or you’ll blow the fuse.

Emery Stora
77 Kingsley
Frederick, CO

>
>
> OK, i give up, how do I get the wiring plug off this Bleepin' Duotherm
> furnace? 78 Eleganza II
> It's on the left side of the unit, in a space about 2" wide, and it's
> about 6" too short to get both hands on to pull it apart.
> And, Oh Yeah!, it has a release on the side of it that I can't operate.
>
> ron
>
> Ron & Linda Clark
> 1978 Eleganza II
> North Plains, ORYGUN
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
 
That is one benefit of an in through the exterior wall model rather than in
from the inside. Way easier to work on/ remove. I could pull the in through
the exterior wall furnace on my eleganza in about 5 minutes without
disturbing the cabinets.

Sully
Bellevue wa.

On Mon, Aug 27, 2018 at 5:18 PM Emery Stora via Gmclist <

> Reach in with wire snips and cut the wires. You’ll need a different plug
> for your new furnace anyway.
> Take out the fuse before cutting or you’ll blow the fuse.
>
> Emery Stora
> 77 Kingsley
> Frederick, CO
>

> >
> >
> > OK, i give up, how do I get the wiring plug off this Bleepin' Duotherm
> > furnace? 78 Eleganza II
> > It's on the left side of the unit, in a space about 2" wide, and it's
> > about 6" too short to get both hands on to pull it apart.
> > And, Oh Yeah!, it has a release on the side of it that I can't operate.
> >
> > ron
> >
> > Ron & Linda Clark
> > 1978 Eleganza II
> > North Plains, ORYGUN
> >
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>