Search results

It is on Gene Fisher’s site. If you can’t find it let me know and I’ll send it to you Emery Stora > > To All: > > I believe that Emery Stora did an article on fixing the coach spread that sometimes occurs on our coach a number of years back. I have not been able to find it and maybe he will...

What do you mean “spark at distributor”? Do you have spark at the end of the wire going to the spark plug? Does your choke work? Emery Stora 77 Kingsley Frederick CO > > Drove 220 miles. Coach was running just fine. Gas stop about 50 miles before stop. Everything running OK. Stopped for the...

If you look into the wheel wells behind the bogie arms you will see the edge of the plywood floor. There is a seam there that sometimes has a leak. When driving in wet weather the tires will throw water into that crack and it will run onto the top of the floor and your carpet will get wet. Use...

Rick Ask her if you should drive with to gasoline turned off! It much more dangerous than propane. Also with propane — too much air it won’t burn, too little air it won’t burn. Emery Stora 77 Kingsley Frederick CO Emery > > Im not afraid of it, wife is and we all she wins.....lol. > > I...

Put a long bolt into the stub and clamp your visegrips onto that. Emery Stora 77 Kingsley Frederick CO > > So good news...I got the drivers side manifold off (doing one side at a > time). I was originally trying to remove the center bold from inside the > coach, then decided to ensure I had...

Call Applied GMC Emery Stora > > G'day, again. > > I still need a new water pump switch for the 4 > switch group in the entryway of a 78 Eleganza. > I lost some of the parts in the original when I took it apart. > > Any suggestions???? > > Thanks, > RonC > > > > > Ron & Linda Clark >...

They can usually be taken apart and cleaned. Emery Stora > > > G'day > > Anybody know where to get a new water pump switch for the 4 switch group > in the entryway of a 78 Eleganza???? > > Thanks, > RonC > > > Ron & Linda Clark > North Plains, ORYGUN > 1978 Eleganza II > > >...

Years back I could not get them out with a hex wrench. I finally used a small pipe on the two or three threads showing. They turned right out. Emery Stora 77 Kingsley Frederick CO > > Proceed with extreme caution on those drain plugs. More often than not, > they are not loose, but are...

Rick is correct. The the 76 and 77 GMCs did not use a light to indicate when the compressor was running but if you look closely at the plastic covering to the lights in the tell-tale panel you can see a low air but there is no bulb behind it. I ran a wire from my compressor and put in a bulb...

I’m really at a loss as to where you can get it checked in Ft Collins. There are some truck shops that can align diesel tractors that have 4 rear wheels as they are similar to the GMC. You might call one or more and ask them if they have experience in aligning dual axle rear wheels. Meanwhile...

There is a good chance that your problem is with the rear wheel alignment. Your front can be in perfect alignment but the rear can create a side to side pull which no amount of steering wheel correction can overcome. I had the same problem a few years back until someone recommended an...

There is no sensor. It is a direct connection to the light. When the compressor is running the light comes on. Someone may have moved a connection at the compressor so that it gets voltage at all times. Emery Stora > > Air compressor works fine on leveling system. Leveling system is working...

You would be covered while at the convention even if your home address is in Canada. I remember at a Convention someone ran a golf cart into a Prevost. Demolished the golf cart and over $15,000 damage to the Prevost. FMCA insurance covered it all. Emery Stora > > I just find it...

Why would you wait two months? If you haven’t heard from them the order is obliviously list. Just pick up the phone and call them Emery Stora > > Anyone else having issues getting parts from https://www.gmcrvparts.com ? > Been wa8ting for almost a month on 2 separate orders > >...

Jared Where have you been for the las 5 years or so. Membership in FMCA has been optional for GMCMI members for a long time. Since the FMCA insurance policy covers GMCMI conventions non members of FMCA could not attend conventions. However since FMCA membership is about the cost of 1/2 tank of...

> > I am also truly wondering what issues make many of us so resistant to improving GMCNET to make it more attractive to our newer owners? This is a subject that really needs more focus and discussion so we can choose the right path. > > > Les Burt > Montreal > '75 Eleganza 26' > > Les...

On what do you base your statement that “one big problem is the newcomers are not coming to GMCnet. “ Do you have any facts to support that or is that just your “feeling”? Also how can you say that this site is not supporting all TZE owners but only “aging gurus”? I seem to recall providing...

I guess I may be getting set in my ways but I don’t see a need to completely switch to a new site. In fact, if we do that I may just drop out and spend my time elsewhere. I have a lot of other things I can do with the years I may have left. I have been posting since almost the beginning of...

Tyler I could use the choke if it available. Let me know what you want for it. Thank you. Emery Stora 77 Kingsley Frederick CO > > I have an onan that most parts already gone (starter, board, exhaust) and wondering before i scrap it if there are parts people want or have a > suggestion for...

What was the coach doing in the motorhome? Or do you mean couch? About any upholstery shop can press you a new button if you have a scrap of the fabric. Emery Stora > > The coach swallowed a large corduroy upholstery button? Looking for 1 or 2 to make my sofa half way presentable. > -- >...