Search results

Yes, those hubcaps were known for popping off. Years ago i lost a few caps and finally I brazed a threaded rod to the dust cover on the wheels and drilled a 1/4 inch hole through the center of the hubcaps. A small 1/4” acorn nut held the hubcap in place. Emery Stora > >  > Hi all, > > On...

You are correct. Set things by the odometer. I used my gps rather than a mile marker. I have found that mile marked often are off by .2 miles. After setting it I checked it by mile markers 100 miles apart. It was within 0.1 miles. Once you have the gps for ten miles record the odometer reading...

Johnny There were some electric Motorhome steps that used an electric wiper motor. Other than that I can’t think of anything. Emery Stora > > Ken, I would like to order a kit. I just want to thank you for your outstanding support of our community! > > JD Lisenby > -- > JD Lisenby- USAF...

Another reason for me not to use the forum. Karma - B.S. Emery Stora > > Hmmm? I don't post on the forum. Wonder how they even rated me, one way or > the other. > Jim Hupy > Salem, Oregon > > On Sat, Oct 17, 2020, 7:14 PM Dennis Sexton via Gmclist < > >> Jim >> On the Forum users can rate...

John I do it your way and it was worked well for me for the last 39 years that I have owned the GMC. Emery Stora > > Is there an advantage to doing as you suggested rather than just replace > the fronts and move everything back a position? > > On Sat, Oct 17, 2020 at 9:12 AM Larry via...

Please post it again. When the original wouldn’t work I deketed it, Emery > > Sorry about that - my initial post had an error in the URL. I corrected it within a minute or two of posting... you’re quick !! > > Please try again from the original post - should be working. > > SW > > > -- >...

I have always put new tires on the front wheels Emery Stora > > I have developed flat spots on my furthest aft tires. I am going to buy 2 new tires to rotate in. Where do I want the newest tires to be mounted? I > thought I read here somewhere that you would want the best tires to be on the...

We used to find the rubber mounts on the Internet from a lawn mower shop but Applied GMC now carries them. Emery Stora Emery > > Wow! Looks just like the one I got. I just ordered two on Amazon for the $8.99, and it comes with a spark plug for a lawn mower. > > Thanks for the information...

I went to Amazon and found an exact fit for the Onan filter. Look for a bright yellow filter as it came with a yellow foam outer wrap that can be removed for cleaning. Search for part number 793569/793685. The UPC code on the package is 0 2484761889 1. The price was $7.69. I also saw a...

There have been some recent posts about what spare parts to carry. Here is an article I wrote some time ago: You are driving down the Interstate in the early evening on Saturday night many miles from the nearest town. All of a sudden, your engine stalls and so you coast over to the side of the...

For the multi-millionaires among us. Emery Stora > > https://www.motor1.com/news/364339/custom-gmc-motorhome-6x6/ > > Ken H. > Americus, GA > '76 X-Birchaven w/Cad500/Howell EFI & EBL, > Manny Brakes & 1-Ton, Troy-Bilt APU, etc., etc., etc. > www.gmcwipersetc.com >...

Jared Turn the breaker off and then on to reset it. Then, with the Onan running, Check the voltage from each side of the breaker to ground. If you have Voltage on only one side then replace the breaker. If you have no voltage then the problem is in the Onan. Probably the bridge rectifier. Fairly...

I owned a 1993 Jeep Grand Cherokee. I was changing the air filter one day and had the thought that it might just work on the GMC. I measured the cross section and felt that it would not block the airflow. I bought one from a dealer and removed the metal Insert and made a riser for between the...

Tom Copper lnes meet the code for RVs. Black pipe is for houses that do not move or roll down the road. It been used for years in RVs. MY 1967 TRAVCO had copper for the propane. Emery Stora > > So I plan on switching my electric fridge out for a 2-way sometime this coming year and I thought...

The cabinets are attached with bolts into expanded nut that are expanded into the aluminum framing. If they just turn when you try to unscrew them you’ll have to try to hold them with pliers. Bolts go up into the ceiling and also back into the wall. If the nuts have turned and you are...

Some of the lines used in earlier years used solid aluminum tubes. In later years that was changed to flexible hoses. You can take your broken tube to a hydraulic hose shop and have them make up a hose with appropriate ends as a replacement. Emery Stora 77 Kingsley Frederick, CO > >...

I used to call it Michigan termites. Emery > > Ken. > > I've seen some engine compartment plywood covering insulation where the foil scrim looked like hell, it was in tatters, which might have been due to > road salt (aka fender solvent (and yes, Matt, I'm stealing your line!)) > > The...

There is a metal cover on the face Remove that and beneath it are the thermostat (called Control assembly in the manual).and the heating element. Do you have the GMC motorhome maintenance manual X7525 ? On page 24J-20 is the Type 1 water heater with the square case and on page 24 J-21 is Type 2...

If that is the original water heater it has a thermostat that can be adjusted. It is located under the cover on the face. If the thermostat has gone bad they can be bought at Ace hardware, Home Depot and many other stores. Emery Stora > > Is there a way to regulate the temp for the hot...

Jim Kanomata appliergmc.com http://appliergmc.com/ carries both the disc/drum and the disc/disc combination valves. Emery Stora > > Does anyone know if this would be the same combination valve for a coach with a rear disk conversion? > -- > Mark S. '73 Painted Desert, > Manny 1 Ton Front...