Search results

Chris Another way is to remove an end from the water heater and drill a hole about an inch back from the end. Put a strong wire through the hole and make a loop. Tie a rope to the loop and then pull the hose from the bottom pulling the rope with it. Then attach the rope to the new hose and have...

Pete That refers to Chuck Boyd. He lives in Knoxville, TN Emery Stora > > Knoxville > > Ken H. > >> >> Where in Tennessee is "chucks shop". >> >> >> -- >> Cary, NC >> >> 1978 Center Kitchen Royale. >> >> _______________________________________________ >> GMCnet mailing list >>...

By the way Paul, I have dumped in several different toilets and none of them overflowed. When it gets about 2/3 or 3/4 full they will flush themselves (no water leaves the tank) and your whole holding tank will pump down the toilet. You do not need to use the toilet flush handle until you are...

I was at a NAPA store yesterday and I asked the employee at the counter if they had a tube of the conductive grease to use under a distributor module. He pointed to a counter and said it would be there. I looked over the whole counter and didn’t find any. I then asked him if he could come over...

Wow- Mike. Some friend. And I thought sticking the hose in the toilet and pumping was a bit disgusting! I can’t imagine myself carrying and dumping eight or nine buckets full of s...! You should consider just getting another length of hose to reach the toilet. Much easier and faster. Emery...

I routinely pump my tank to a sewer clean out when I return from a trip. I pump about 125 feet. 75 foot of that is 3/4” garden hose. 50 feet is a 5/8” garden hose. I have dumped into toilets in the past. You do not flush it. You put the hose in the toilet and then turn on your macerator. The...

I think the car looks great. I wouldn’t buy it for a toad though. First of all it weighs 4000 pounds. Quite a bit heavier than my Geo Tracker. Also, it’s 25 years old already. Too much maintenance and hard to find parts for me. Emery Stora 77 Kingsley Frederick, CO > > Thanks, Emery. I have...

Bob Only part of the air is from the outside. There is an opening in the top passenger side of the box. That brings outside air in. Not just to the defrosters. It leads into the area where the fan blower is. The rest of the air for the heater is recycled from the inside. There is an opening at...

>> > Yea, Emery, being built on a truck chassis they are on the heavy side. >> With a manual trans in neutral, the transfer case in high 2wd and the >> > front hubs unlocked the rear wheels, rear drive shaft and the >> transmission output shaft will be turning, but that seems no different from...

Matt go to the LocknLube site. That have an end for the flexibly line of your grease gun that will free up your hands to properly use the pump. I also bought their “boot” that goes over the end of the grease gun to keep it from dripping. I doould have bought these things years ago. Emery...

I found that an Acrylic spray paint worked well. I used Krylon. They had an antique white that matched quite well with the tan color on many GMCs such as my 1977 Kingsley. However, I haven’t see that color lately. Walmart used to carry it. You don’t have a signature line showing which motorhome...

Does your refrigerator vent door match? That is easy to remove. Emery Stora > > It is! I wonder how hard it would be to get off > > thanks > > >>> I have no part of the coach I can remove (well I could pull the engine hatch) with the beige/peach upper half color. How could i get that >>>...

Looking up the specs I see that it weighs 4000 pounds. I also read that it = shouldn=E2=80=99t be towed 4 down as it has no neutral on the transfer case= . Otherwise it looks like a fun car. Emery Stora 77 Kingsley F= rederick, CO > On May 30, 2018, at 9:59 AM, Gerald Work wrote: > > If you...

Not sure what you are looking at but the 18598-1000, Service Kit for Macerator Pump, 18590 and 18690 on Amazon is about $54 with free shipping. Emery Stora > > Kleen-Rite has the best prices on the Jabsco 18598-2000 service kit at $52 but add shipping. Same thing at Amazon is $105. > Just...

I have bought things from McMaster Carr in the past but the shipping costs plus the parts are usually more than Amazon and I get free 2 day delivery from Amazon on most items. I often don’t do a lot of searching just to save a dollar or two. It’s not worth my time. Emery Stora > > Emery, > >...

Matt - you are not a “know it all” but you are a purist! :) Emery > >> According to the Klein parts website, they are SAE. Not metric. >> I was just going to get 4 4 inch stainless studs and cut to size. Then get 4 stainless castle nuts. >> Scott. > > Scott, > > Not to be a purist or any...

Good luck finding them in the right thread and length I went to 4 different hardware stores including Ace and nobody had them. That is hoe I ordered them from Amazon as a kit for the Jabsco. Emery Stora > > BTW, > Just got off the phone with the tech person at Xylem(the parent company of...

I think most parts are interchangeable between the two makes. Emery Stora > > Emery, Thanks! > This is the post I was looking for. My Flojet did the same thing with one of the brass studs while backing the castle nut off. I wonder if this kit > will work with the Flojet? I don't see why not...

No, you don’t just replace the bulb. You replace the light assembly. The LED ones are totally sealed so no moisture can get under the lens and cause corrosion. I got mine years back from Jim Kanomata at Applied GMC. Emery Stora 77 Kingsley Frederick, CO > > Is this as simple as replacing a...

The hair also goes down the sink drain and possibly the toilet. My wife has long hair and I used to travel with two daughters with long hair. They all brushed their hair in the bathroom and lots of it fell all over. I was probably one of the first people to install a macerator. I installed one...