Work platform

[jerry work]

Ok, I know no one on this forum needs a 300 pound work platform……but, at less than $30 (down from $70) this is hard to pass up for a lot of GMC stuff. It is 20” high and 4’ long which will get you safely up where you need to be for a lot of what you need to do on your GMC. folds really flat for easy storage. I just purchased one for use with our Prevost where reaching the windshields for washing is a bit of a chore from the ground. With this extra 20” it is a snap. Way better than standing on the front bumper of your GMC like I used to do……. On sale at Home Depot right now:

https://www.homedepot.com/b/Building-Materials-Ladders-Work-Platforms/Gorilla-Ladders/N-5yc1vZcbp1Zno

Jerry
Jerry Work
The Dovetail Joint
Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR

glwork
http://jerrywork.com

 

[dave stragand1]

Thanks, Jerry. Great idea. I just went and checked them out and bought one.

>
> Ok, I know no one on this forum needs a 300 pound work platform……but, at less than $30 (down from $70) this is hard to pass up for a lot of GMC stuff. It is 20” high and 4’ long which will get you safely up where you need to be for a lot of what you need to do on your GMC. folds really flat for easy storage. I just purchased one for use with our Prevost where reaching the windshields for washing is a bit of a chore from the ground. With this extra 20” it is a snap. Way better than standing on the front bumper of your GMC like I used to do……. On sale at Home Depot right now:
>
> https://www.homedepot.com/b/Building-Materials-Ladders-Work-Platforms/Gorilla-Ladders/N-5yc1vZcbp1Zno
>
> Jerry
> Jerry Work
> The Dovetail Joint
> Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR
>
> glwork
> http://jerrywork.com
>
>
>
>
>
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

 

[Ken H.]

Me too. I've ordered one for pickup at the nearest Home Depot, 32 miles
away, when I get down that way.

Ken H.

On Thu, Nov 16, 2017 at 9:12 PM, Dave Stragand <

> Thanks, Jerry. Great idea. I just went and checked them out and bought
> one.
>

> >
> > Ok, I know no one on this forum needs a 300 pound work platform……but, at
> less than $30 (down from $70) this is hard to pass up for a lot of GMC
> stuff.
>
​...

 

[d c *mac* macdonald]

Rob?

> >
> > Ok, I know no one on this forum needs a 300 pound work platform……but, at
> less than $30 (down from $70) this is hard to pass up for a lot of GMC
> stuff.

 

[robert mueller]

Mac,

If I'm the "Rob?" I've been busy helping John with arrangements for Beth and haven't had time to go look at this, maybe on Sunday.

Regards,
Rob M.
The Pedantic Mechanic
Sydney, Australia
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
USA '77 Kingsley - TZE 267V100808


-----Original Message-----
From: Gmclist [mailto:gmclist-bounces] On Behalf Of D C _Mac_ Macdonald
Sent: Thursday, November 16, 2017 8:31 PM
To: GMC Mail List
Subject: Re: [GMCnet] Work platform

Rob?

> >
> > Ok, I know no one on this forum needs a 300 pound work platform……but, at
> less than $30 (down from $70) this is hard to pass up for a lot of GMC
> stuff.

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org