Great! We'll have to start (WILL) start shipping your kits with that item
deleted,
Do you have enough to supply me for other customer?
Thanks,
Ken
On Sat, Jan 30, 2021 at 1:17 AM Jim Kanomata via Gmclist <
> Ken,
> We are able to supply plenty of the pigtails.
>
>
> On Wed, Jan 27, 2021 at 4:59 PM Len Len via Gmclist <
> gmclist>
>
> > Ken,
> >
> > A pic would help. Lots of junkyards in Las Vegas.
> >
> > LEN NOVAK
> >
> > On Wed, Jan 27, 2021 at 16:53 Ken Henderson via Gmclist <
> >
> > > Early warning: I am now officially out of wiper motor pigtails (5-pin
> > > connectors with wires). All of the junk yards near here have been
> > cleaned
> > > out and I don't expect to be in Atlanta any time soon to visit a
> > > Pull-a-Part. SO, if you're planning to order an electric wiper upgrade
> > > kit, be aware that I WILL NOT be able to supply a pigtail. If you're
> in
> > a
> > > junkyard, for whatever reason, go ahead and get a pigtail. The 5-pin
> > > connector is used on virtually all GM trucks and SUV's of the '90's.
> > Those
> > > on S-10's are easiest to collect because the ground wire and the other
> 4
> > > wires are in a separate bundle toward the driver's side. Other
> vehicles
> > > have the ground, only, routed toward the passenger side, thus
> > complicating
> > > pulling the 12" or so you'd like to get. Cost should be > > This does NOT imply that those same motors work with my kit -- ONLY the
> > > '90-'96 Chevy Lumina APV/Old Silhouette, or Pontiac Transport front
> wiper
> > > motors fit it!
> > >
> > > Buying a new connector (pigtail) from a dealer, parts store, eBay,
> etc.,
> > is
> > > certainly possible -- but expensive. I've seen them for as much as
> $50,
> > > and seldom below $30.
> > >
> > > When I have them, I clean the pigtails and sell them for $10, so if
> > > anyone's visiting a junkyard and wants to earn a couple of bucks,
> collect
> > > and send a few to me; I'll pay $5.00 each. Just be sure they're not
> REAL
> > > dirty or oil-soaked, and that the latch is not broken.
> > > Here's the pattern we use, looking into the connector on the motor:
> > >
> > > LATCH
> > > -------------------
> > > |A C|
> > > | B |
> > > |D E|
> > > ------------------
> > >
> > > Ken H.
> > > Americus, GA
> > > '76 X-Birchaven w/Cad500/Howell EFI & EBL,
> > > Manny Brakes & 1-Ton, Troy-Bilt APU, etc., etc., etc.
> > >
www.gmcwipersetc.com
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > >
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> > >
> > --
> >
> > *Len and Pat Novak*
> >
> > *1978 GMC Kingsley*
> >
> > *The Beast II with dash lights that work and labels you can see!*
> >
> > *Las Vegas, NV* new email: B52sRule >
> >
> >
http://www.gmcmhphotos.com/photos/showgallery.php?cat=4375
> >
> >
> >
> >
www.bdub.net/novak/
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> >
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >
>
>
> --
> Jim Kanomata
> Applied/GMC, Newark,CA
> jimk
>
http://www.gmcrvparts.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
