wiper control

[blank]

While chatting with Jim Bounds at Myrtle Beach, he metioned someone that
rebuilds the hydraulic wiper controls. Hopefully, he'll chime in here with
the source. If not, call him tomorrow at 877-275-4462.

Patrick

> -----Original Message-----
> From: SNAPPYMJ [mailto:SNAPPYMJ]
> Sent: Tuesday, March 30, 1999 6:56 PM
> To: gmcmotorhome
> Subject: GMC: wiper control
>
>
> My wipers come on by themselves . I press the control to off,
> it last a few
> miles
> then they come on again. Is this control re buildable?
>

 

[jim bounds1]

Lanier,
Bill does do the wiper motors and if you would like to spread the word but
not interrupt his sleep, he works through Zeb at Southland. Call Zeb and
he will be happy to handle the transaction.

As far as the control cable goes, I do not know if he has expanded his
scope into the cable or a retrofit. It sure would ba a natural for him and
a sorely needed part to boot! I for one would love to have a source for a
replacement or even a better wiper control. Sometime in a quiet moment I
have spent time thinking of another way to tickle the wiper motor. Maybe
one of us on the net will come up with the answer- think about it "you all".

Jim Bounds
- ---------------------------------

>In a message dated 4/1/99 7:45:47 AM Central Standard Time,

>
>>
>> While chatting with Jim Bounds at Myrtle Beach, he metioned someone that
>> rebuilds the hydraulic wiper controls.
>I think Bill Telgen of Hartwell, GA rebuilds them for the GMC shops. Let me
>confirm before posting tel # and flooding him with calls.
>Lanier
>
>
Jim Bounds / Co-op Motor Works Orlando www.gmccoop.com

 

[jim bounds1]

Snappy, your control cable tothe wiper motor needs adjustment. The control
holds the arm from the on button on the side of the wiper motor. The cable
is slipping and allowing the arm to touch the button, it doesn't take much!

I have cremped the control cable to give it a bit of drag to stop that.

Hope this helps,

Jim Bounds
- -----------------------------

>While chatting with Jim Bounds at Myrtle Beach, he metioned someone that
>rebuilds the hydraulic wiper controls. Hopefully, he'll chime in here with
>the source. If not, call him tomorrow at 877-275-4462.
>
>Patrick
>
>> -----Original Message-----
>> From: SNAPPYMJ [mailto:SNAPPYMJ]
>> Sent: Tuesday, March 30, 1999 6:56 PM
>> To: gmcmotorhome
>> Subject: GMC: wiper control
>>
>>
>> My wipers come on by themselves . I press the control to off,
>> it last a few
>> miles
>> then they come on again. Is this control re buildable?
>>
>
>
Jim Bounds / Co-op Motor Works Orlando www.gmccoop.com