When I installed headers, I also fabricated sheet metal shields to
protect areas that were close to the headers. The right wheel well was one.
A shield was attached to the wheel well and stands off about a 1/2". So far
there has been no header-heat effect on the wheel well.
Kathy & Al Hamilton
76 Eleganza II
Kingston, Ont
protect areas that were close to the headers. The right wheel well was one.
A shield was attached to the wheel well and stands off about a 1/2". So far
there has been no header-heat effect on the wheel well.
Kathy & Al Hamilton
76 Eleganza II
Kingston, Ont
