Wet Bath Module Needed

[bryan strickland]

[Admin note - Bryan, this post was html encoded. Please post in
"plain text only. Patrick]

I'm looking for a wet bath module for a 26' GMC. My camper was
stripped out and I have nothing but four walls. The bathroom is
on the pass. side. Please E-Mail me at bee4lee

Thanks
Bryan from N.J.

 

[thom hole]

I had the same issue on my Transmode-to-Motorhome conversion project. I
got a good used one from Alex Sirum in Florida. Paid $200 IIRC with no
shipping as I went to Florida with my trailer to get it. Also bought a
dinnette, spare airbag and a propane cylinder at the same time.

The othe rissue you will face is that you have to remove tyhe 'Back Hatch'
to get it in!! The screws usualy rust into the fibreglass and are a
challenge to get out. I replaced ALL of the old ones with a cool stainless
screw/insert kit from Jim Bounds at COOP Motorworks.

>[Admin note - Bryan, this post was html encoded. Please post in
>"plain text only. Patrick]
>
> I'm looking for a wet bath module for a 26' GMC. My camper was
>stripped out and I have nothing but four walls. The bathroom is
>on the pass. side. Please E-Mail me at bee4lee
>
>Thanks
>Bryan from N.J.
>

 

[thom hole]

I had the same issue on my Transmode-to-Motorhome conversion project. I
got a good used one from Alex Sirum in Florida. Paid $200 IIRC with no
shipping as I went to Florida with my trailer to get it. Also bought a
dinnette, spare airbag and a propane cylinder at the same time.

The othe rissue you will face is that you have to remove tyhe 'Back Hatch'
to get it in!! The screws usualy rust into the fibreglass and are a
challenge to get out. I replaced ALL of the old ones with a cool stainless
screw/insert kit from Jim Bounds at COOP Motorworks.

>[Admin note - Bryan, this post was html encoded. Please post in
>"plain text only. Patrick]
>
> I'm looking for a wet bath module for a 26' GMC. My camper was
>stripped out and I have nothing but four walls. The bathroom is
>on the pass. side. Please E-Mail me at bee4lee
>
>Thanks
>Bryan from N.J.
>