Water heater hose

[emerystora]

I want to replace my water heat hose, both to the bathroom water heater and to the driver’s compartment heater.
Who can tell me the length needed for both the 5/8” and the 3/4” hoses.

Thanks,

Emery Stora
77 Kingsley
Frederick, CO

 

[Matt Colie]

> I want to replace my water heat hose, both to the bathroom water heater and to the driver's compartment heater.
> Who can tell me the length needed for both the 5/8" and the 3/4" hoses.
>
> Thanks,
>
> Emery Stora
> 77 Kingsley
> Frederick, CO

Emery,

So many years ago, one a page here. I said that hose to my water heater was gone and I asked the same question.
Someone said, "Just buy the box."
I ended up with about 5 feet left over. But, I do have a 23.

Matt
--
Matt & Mary Colie - '73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Still Loving OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Twixt A2 and Detroit

 

[Gene Fisher]

Read here
http://bdub.net/gmcmotorhome.info/living.html

> > I want to replace my water heat hose, both to the bathroom water heater
> and to the driver's compartment heater.
> > Who can tell me the length needed for both the 5/8" and the 3/4" hoses.
> >
> > Thanks,
> >
> > Emery Stora
> > 77 Kingsley
> > Frederick, CO
>
> Emery,
>
> So many years ago, one a page here. I said that hose to my water heater
> was gone and I asked the same question.
> Someone said, "Just buy the box."
> I ended up with about 5 feet left over. But, I do have a 23.
>
> Matt
> --
> Matt & Mary Colie - '73 Glacier 23 - Members GMCMI, GMCGL, GMCES
> Still Loving OE Rear Drum Brakes with Applied Control Arms
> SE Michigan - Twixt A2 and Detroit
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://bdub.net/gmcmotorhome.info/
Alternator Protection Cable
http://bdub.net/gmcmotorhome.info/APC.html

 

[Carl Stouffer]

Emery,

It's been a while, but like Matt, I just bought "the box". I think it was 50' of 5/8 and 7' or 8' of 3/4.


--
Carl Stouffer
'75 ex Palm Beach
Tucson, AZ.
Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles,
Solar battery charging

 

[Bob Dunahugh]

My water heater hoses were going across the engine to the right of the carb. On the valve cover. Didn't like that much. So when I replaced my hoses. I got some hose hangers. Then mounted them to the underside of the plywood floor next to the engine hatch. Simple. And away from the A/C compressor/hoses, and any V belts. Did this with some other items. Really cleaned up the engine compartment. And away from moving around on a running engine.

Bob Dunahugh

 

[Ken B]

I did the same thing. I mounted two tees to the bottom of the passenger side floor and ran the 6 hoses from there.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana