Vent line to filler neck

Ken B

Well-known member
Oct 9, 2002
16,833
280
83
Is the vent line going to the filler neck something special? I noticed yesterday that it has a crack at the top and has been leaking for quite a
while. I have not taken it apart yet but it appears to be just 1/2" or so gasoline hose.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
 
Ken,

That piece and the couplers on the fill line are the only part that are not Gates Barrier. That has lasted 10 years so far. If I have to redo it, I
will get something better.

Matt
--
Matt & Mary Colie - '73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan
OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Twixt A2 and Detroit
 
Ken, It has been only few years since the manufactures did not figure out
how to overcome the Ethanol deteriorating the older rubber, even few years
old.
Just use the Standard 1/2 " fuel line,make sure it is not the Old stock.
Since the 1/2 " does not move as much, you can easily get one couple years
old.

> Ken,
>
> That piece and the couplers on the fill line are the only part that are
> not Gates Barrier. That has lasted 10 years so far. If I have to redo it,
> I
> will get something better.
>
> Matt
> --
> Matt & Mary Colie - '73 Glacier 23 - Members GMCMI, GMCGL, GMCES
> Electronically Controlled Quiet Engine Cooling Fan
> OE Rear Drum Brakes with Applied Control Arms
> SE Michigan - Twixt A2 and Detroit
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
 
Thanks everyone. Oreiliies shows it in stock locally. I'll measure it and go get a piece before I tear this one out. I wanted to make sure that it
was not something unique to the GMC Like the filler tube (I believe 1") connect likes and elbow.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana