update on pullers??
- Thread starter thom hole
- Start date
Thom Hole. Sent this e-mail to everyone on the list including you. I only
received two addresses that were returned because of bad e-mail addresses
and yours was not one of them. Is this correct?
>To: Michael.Andrews, Richard Bachert
,"Bartz, Paul" , herm
beeck , "Chuck Blanford" Chuck.Blanford, ,Chuck
Botts , "Bright, Walter"
paa8394, Thomas T Clarke , Condos
, Henry Davis , John Dolan
, "Walter M. Drew" , DEvans753,
Ken & Virginia Fitzgerald , "Frank Folkmann"
, "Lanier Foot", "LELAND L GARLAND"
,"Mark Grady" ,Thom Hole
, "G.M. Hope" gmhope,Ritch Hwang
,Jeff108740, Terry
Krauskopf, D & D Lowry ,"Steve Magown" magown,
Dave DGMDGM, Billy Massey bdub, "Bob McCarthy"
, Marcus McGee ,"Donald W.
Miller" millerdw, Gary Miller grizzly,"hemogoblin"
,William Myers wmyers442, "Loren (Skip)
Newhouse" lnewh, Darren Paget paget, "hawk
ii-Pete.Papas" , Bill & Joan Satterfield
, Zachary Zehnacker zakz,"Terry & Skinner"
fairwind, RickStapls,Phil Stewart
,EMERYSTORA, JAStruther,
LARRYDTIMOTHY Tim>,"Tipton, Eric" ,Jim
Walker , Richard Waters
digitek,Jrwheeler7, "Dan Winchester"
, "Heinz Wittenbecher" , John
Wright ,F25CCapt,
>From: Tom Warner
>Subject: Bearing Puller update
>
>Was at my friends machine shop yesterday and was told he would have the
first puller completed Monday. Others will be coming shortly thereafter.
He had to order the 5 1/4" diameter 4140 pre-hard steel rod for them special
and it should be here early next week.
>
>As i told you previously he is doing this for me as a favor and as a fill
in to other contract jobs he has. I have really hated to push him any harder
for completing the first ones. I hope every one understands. Got the first
2 adapters, one to assist in pulling the bearings off and the other insert
to pull the bearing back on with the use of the OTC-927 puller. they are
very very nice finish right off the CNC machine. It is hard to believe that
the machine can do them so fast and still put out such a nice surface.
Because it is so nice I have decided not to black oxide them. I am told it
is harder to hold a close tolerance on the puller that I wanted if they are
machined first and than sent out to be coated. Hope I made the right choice.
>
>These things are very rugged as anyone who has the OTC-927 puller can
attest to. This puller should be able to pull off even a welded on bearing
race. doesn't make a difference whether the outside race is there or not.
>
>Will let everyone know when the first ones are available and will than
start packing them and shipping them out in the order that I received
checks. Will send them all UPS so you can track them.
>
>thanks for waiting and know you will be impressed with the quality of this
tool.
>
>Tom
>
>Tom Warner ( Mr. GMC puller), What's the latest on the pullers?? Haven't
>seen or heard anything since the final price was established and money was
>sent.
>
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach
"The beautiful Mohawk Vally"
received two addresses that were returned because of bad e-mail addresses
and yours was not one of them. Is this correct?
>To: Michael.Andrews, Richard Bachert
,"Bartz, Paul" , herm
beeck , "Chuck Blanford" Chuck.Blanford, ,Chuck
Botts , "Bright, Walter"
paa8394, Thomas T Clarke , Condos
, Henry Davis , John Dolan
, "Walter M. Drew" , DEvans753,
Ken & Virginia Fitzgerald , "Frank Folkmann"
, "Lanier Foot", "LELAND L GARLAND"
,"Mark Grady" ,Thom Hole
, "G.M. Hope" gmhope,Ritch Hwang
,Jeff108740, Terry
Krauskopf, D & D Lowry ,"Steve Magown" magown,
Dave DGMDGM, Billy Massey bdub, "Bob McCarthy"
, Marcus McGee ,"Donald W.
Miller" millerdw, Gary Miller grizzly,"hemogoblin"
,William Myers wmyers442, "Loren (Skip)
Newhouse" lnewh, Darren Paget paget, "hawk
ii-Pete.Papas" , Bill & Joan Satterfield
, Zachary Zehnacker zakz,"Terry & Skinner"
fairwind, RickStapls,Phil Stewart
,EMERYSTORA, JAStruther,
LARRYDTIMOTHY Tim>,"Tipton, Eric" ,Jim
Walker , Richard Waters
digitek,Jrwheeler7, "Dan Winchester"
, "Heinz Wittenbecher" , John
Wright ,F25CCapt,
>From: Tom Warner
>Subject: Bearing Puller update
>
>Was at my friends machine shop yesterday and was told he would have the
first puller completed Monday. Others will be coming shortly thereafter.
He had to order the 5 1/4" diameter 4140 pre-hard steel rod for them special
and it should be here early next week.
>
>As i told you previously he is doing this for me as a favor and as a fill
in to other contract jobs he has. I have really hated to push him any harder
for completing the first ones. I hope every one understands. Got the first
2 adapters, one to assist in pulling the bearings off and the other insert
to pull the bearing back on with the use of the OTC-927 puller. they are
very very nice finish right off the CNC machine. It is hard to believe that
the machine can do them so fast and still put out such a nice surface.
Because it is so nice I have decided not to black oxide them. I am told it
is harder to hold a close tolerance on the puller that I wanted if they are
machined first and than sent out to be coated. Hope I made the right choice.
>
>These things are very rugged as anyone who has the OTC-927 puller can
attest to. This puller should be able to pull off even a welded on bearing
race. doesn't make a difference whether the outside race is there or not.
>
>Will let everyone know when the first ones are available and will than
start packing them and shipping them out in the order that I received
checks. Will send them all UPS so you can track them.
>
>thanks for waiting and know you will be impressed with the quality of this
tool.
>
>Tom
>
>Tom Warner ( Mr. GMC puller), What's the latest on the pullers?? Haven't
>seen or heard anything since the final price was established and money was
>sent.
>
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach
"The beautiful Mohawk Vally"
FYI
I never recieved that email either Tom.
>Thom Hole. Sent this e-mail to everyone on the list including you. I only
>received two addresses that were returned because of bad e-mail addresses
>and yours was not one of them. Is this correct?
........snip............
bdub
I never recieved that email either Tom.
>Thom Hole. Sent this e-mail to everyone on the list including you. I only
>received two addresses that were returned because of bad e-mail addresses
>and yours was not one of them. Is this correct?
........snip............
bdub
FYI
I never recieved that email either Tom.
>Thom Hole. Sent this e-mail to everyone on the list including you. I only
>received two addresses that were returned because of bad e-mail addresses
>and yours was not one of them. Is this correct?
........snip............
bdub
I never recieved that email either Tom.
>Thom Hole. Sent this e-mail to everyone on the list including you. I only
>received two addresses that were returned because of bad e-mail addresses
>and yours was not one of them. Is this correct?
........snip............
bdub
Date and time was 9:42PM 6/5/99.
If anyone else did not get it check the e-mail address and send me a
correction.As I said earlier only got two incorrect addresses back and
corrected them and resent.
>Tom...
>
>I understand the situation with the fellow doing you a favor, and there
>is no problem on that score, at all. My email address is on that
>message, but I must have missed it, too. What was the date of that
>message (it refers to Monday but I can't tell from your reprint, which
>Monday )
>
>Thanks for doing this (and don't tell us there were no hassels) I know
>better. (Maybe even one or two to come)
>
>--
>"I do whatever my Rice Krispies tell me to..." John said, from inside a
>1974 Glacier.
>
>
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach
"The beautiful Mohawk Vally"
If anyone else did not get it check the e-mail address and send me a
correction.As I said earlier only got two incorrect addresses back and
corrected them and resent.
>Tom...
>
>I understand the situation with the fellow doing you a favor, and there
>is no problem on that score, at all. My email address is on that
>message, but I must have missed it, too. What was the date of that
>message (it refers to Monday but I can't tell from your reprint, which
>Monday )
>
>Thanks for doing this (and don't tell us there were no hassels) I know
>better. (Maybe even one or two to come)
>
>--
>"I do whatever my Rice Krispies tell me to..." John said, from inside a
>1974 Glacier.
>
>
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach
"The beautiful Mohawk Vally"
Billy corrected your e-mail address.
>FYI
>I never recieved that email either Tom.
>
>
>>Thom Hole. Sent this e-mail to everyone on the list including you. I only
>>received two addresses that were returned because of bad e-mail addresses
>>and yours was not one of them. Is this correct?
>........snip............
>
>bdub
>
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach
"The beautiful Mohawk Vally"
>FYI
>I never recieved that email either Tom.
>
>
>>Thom Hole. Sent this e-mail to everyone on the list including you. I only
>>received two addresses that were returned because of bad e-mail addresses
>>and yours was not one of them. Is this correct?
>........snip............
>
>bdub
>
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach
"The beautiful Mohawk Vally"
Although my address looks correct, I did not get any posts either. Maybe
somebody's server screwed up or something. No big deal. I just assumed you
would send them when you had them. Thanks Darren
> Date and time was 9:42PM 6/5/99.
>
> If anyone else did not get it check the e-mail address and send me a
> correction.As I said earlier only got two incorrect addresses back and
> corrected them and resent.
>
> >Tom...
> >
> >I understand the situation with the fellow doing you a favor, and there
> >is no problem on that score, at all. My email address is on that
> >message, but I must have missed it, too. What was the date of that
> >message (it refers to Monday but I can't tell from your reprint, which
> >Monday )
> >
> >Thanks for doing this (and don't tell us there were no hassels) I know
> >better. (Maybe even one or two to come)
> >
> >--
> >"I do whatever my Rice Krispies tell me to..." John said, from inside a
> >1974 Glacier.
> >
> >
> >
> Tom & Marg Warner
> Vernon Center NY
> 1976 palmbeach
> "The beautiful Mohawk Vally"
somebody's server screwed up or something. No big deal. I just assumed you
would send them when you had them. Thanks Darren
> Date and time was 9:42PM 6/5/99.
>
> If anyone else did not get it check the e-mail address and send me a
> correction.As I said earlier only got two incorrect addresses back and
> corrected them and resent.
>
> >Tom...
> >
> >I understand the situation with the fellow doing you a favor, and there
> >is no problem on that score, at all. My email address is on that
> >message, but I must have missed it, too. What was the date of that
> >message (it refers to Monday but I can't tell from your reprint, which
> >Monday )
> >
> >Thanks for doing this (and don't tell us there were no hassels) I know
> >better. (Maybe even one or two to come)
> >
> >--
> >"I do whatever my Rice Krispies tell me to..." John said, from inside a
> >1974 Glacier.
> >
> >
> >
> Tom & Marg Warner
> Vernon Center NY
> 1976 palmbeach
> "The beautiful Mohawk Vally"
Tom...
I understand the situation with the fellow doing you a favor, and there
is no problem on that score, at all. My email address is on that
message, but I must have missed it, too. What was the date of that
message (it refers to Monday but I can't tell from your reprint, which
Monday )
Thanks for doing this (and don't tell us there were no hassels) I know
better. (Maybe even one or two to come)
- --
"I do whatever my Rice Krispies tell me to..." John said, from inside a
1974 Glacier.
I understand the situation with the fellow doing you a favor, and there
is no problem on that score, at all. My email address is on that
message, but I must have missed it, too. What was the date of that
message (it refers to Monday but I can't tell from your reprint, which
Monday )
Thanks for doing this (and don't tell us there were no hassels) I know
better. (Maybe even one or two to come)
- --
"I do whatever my Rice Krispies tell me to..." John said, from inside a
1974 Glacier.
I copied the e-mail addresses directly from each of your repsonses to me
although I noticed that they were different. I didn't change them since I
did not know what each of YOUR ISP required. Its a catch 22.
>Tom...
>
>About 40% of the mailing addresses on your private list do not have
>quotation marks around the clear text name of the party addressed. Your
>mailer must require that, since 100% of the folks claiming non-receipt
>have no quotation marks around their name.
>
>--
>"I do whatever my Rice Krispies tell me to..." John said, from inside a
>1974 Glacier.
>
>
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach
"The beautiful Mohawk Vally"
although I noticed that they were different. I didn't change them since I
did not know what each of YOUR ISP required. Its a catch 22.
>Tom...
>
>About 40% of the mailing addresses on your private list do not have
>quotation marks around the clear text name of the party addressed. Your
>mailer must require that, since 100% of the folks claiming non-receipt
>have no quotation marks around their name.
>
>--
>"I do whatever my Rice Krispies tell me to..." John said, from inside a
>1974 Glacier.
>
>
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach
"The beautiful Mohawk Vally"
Tom,
I also never received your message on the puller. My address appears to
be correct.
J.R. Wright
GMC GreatLaker
77 Eleganza II
Michigan
>
> Date and time was 9:42PM 6/5/99.
>
> If anyone else did not get it check the e-mail address and send me a
> correction.As I said earlier only got two incorrect addresses back and
> corrected them and resent.
>
> >Tom...
> >
> >I understand the situation with the fellow doing you a favor, and there
> >is no problem on that score, at all. My email address is on that
> >message, but I must have missed it, too. What was the date of that
> >message (it refers to Monday but I can't tell from your reprint, which
> >Monday )
> >
> >Thanks for doing this (and don't tell us there were no hassels) I know
> >better. (Maybe even one or two to come)
> >
> >--
> >"I do whatever my Rice Krispies tell me to..." John said, from inside a
> >1974 Glacier.
> >
> >
> >
> Tom & Marg Warner
> Vernon Center NY
> 1976 palmbeach
> "The beautiful Mohawk Vally"
I also never received your message on the puller. My address appears to
be correct.
J.R. Wright
GMC GreatLaker
77 Eleganza II
Michigan
>
> Date and time was 9:42PM 6/5/99.
>
> If anyone else did not get it check the e-mail address and send me a
> correction.As I said earlier only got two incorrect addresses back and
> corrected them and resent.
>
> >Tom...
> >
> >I understand the situation with the fellow doing you a favor, and there
> >is no problem on that score, at all. My email address is on that
> >message, but I must have missed it, too. What was the date of that
> >message (it refers to Monday but I can't tell from your reprint, which
> >Monday )
> >
> >Thanks for doing this (and don't tell us there were no hassels) I know
> >better. (Maybe even one or two to come)
> >
> >--
> >"I do whatever my Rice Krispies tell me to..." John said, from inside a
> >1974 Glacier.
> >
> >
> >
> Tom & Marg Warner
> Vernon Center NY
> 1976 palmbeach
> "The beautiful Mohawk Vally"
If Zak and Henry Davis didn't get a copy... I think I know why Bill
Massey, Thom and I didn't get a copy.
I just checked and it didn't get here in my case. I didn't miss it, as I
said I might have. I think it must have gone into the ether, since it
didn't bounce back to you Tom.
- --
"I do whatever my Rice Krispies tell me to..." John said, from inside a
1974 Glacier.
Massey, Thom and I didn't get a copy.
I just checked and it didn't get here in my case. I didn't miss it, as I
said I might have. I think it must have gone into the ether, since it
didn't bounce back to you Tom.
- --
"I do whatever my Rice Krispies tell me to..." John said, from inside a
1974 Glacier.
Tom...
About 40% of the mailing addresses on your private list do not have
quotation marks around the clear text name of the party addressed. Your
mailer must require that, since 100% of the folks claiming non-receipt
have no quotation marks around their name.
- --
"I do whatever my Rice Krispies tell me to..." John said, from inside a
1974 Glacier.
About 40% of the mailing addresses on your private list do not have
quotation marks around the clear text name of the party addressed. Your
mailer must require that, since 100% of the folks claiming non-receipt
have no quotation marks around their name.
- --
"I do whatever my Rice Krispies tell me to..." John said, from inside a
1974 Glacier.
In checking the address the quotes were missing from the names on more
than 20 of the address and those people did not receive the E-Mail
J.R. Wright
>
> Thom Hole. Sent this e-mail to everyone on the list including you. I only
> received two addresses that were returned because of bad e-mail addresses
> and yours was not one of them. Is this correct?
>
> >To: Michael.Andrews, Richard Bachert
> ,"Bartz, Paul" , herm
> beeck , "Chuck Blanford" Chuck.Blanford, ,Chuck
> Botts , "Bright, Walter"
> paa8394, Thomas T Clarke , Condos
> , Henry Davis , John Dolan
> , "Walter M. Drew" , DEvans753,
> Ken & Virginia Fitzgerald , "Frank Folkmann"
> , "Lanier Foot", "LELAND L GARLAND"
> ,"Mark Grady" ,Thom Hole
> , "G.M. Hope" gmhope,Ritch Hwang
> ,Jeff108740, Terry
> Krauskopf, D & D Lowry ,"Steve Magown" magown,
> Dave DGMDGM, Billy Massey bdub, "Bob McCarthy"
> , Marcus McGee ,"Donald W.
> Miller" millerdw, Gary Miller grizzly,"hemogoblin"
> ,William Myers wmyers442, "Loren (Skip)
> Newhouse" lnewh, Darren Paget paget, "hawk
> ii-Pete.Papas" , Bill & Joan Satterfield
> , Zachary Zehnacker zakz,"Terry & Skinner"
> fairwind, RickStapls,Phil Stewart
> ,EMERYSTORA, JAStruther,
> LARRYDTIMOTHY Tim>,"Tipton, Eric" ,Jim
> Walker , Richard Waters
> digitek,Jrwheeler7, "Dan Winchester"
> , "Heinz Wittenbecher" , John
> Wright ,F25CCapt,
> >From: Tom Warner
> >Subject: Bearing Puller update
> >
> >Was at my friends machine shop yesterday and was told he would have the
> first puller completed Monday. Others will be coming shortly thereafter.
> He had to order the 5 1/4" diameter 4140 pre-hard steel rod for them special
> and it should be here early next week.
> >
> >As i told you previously he is doing this for me as a favor and as a fill
> in to other contract jobs he has. I have really hated to push him any harder
> for completing the first ones. I hope every one understands. Got the first
> 2 adapters, one to assist in pulling the bearings off and the other insert
> to pull the bearing back on with the use of the OTC-927 puller. they are
> very very nice finish right off the CNC machine. It is hard to believe that
> the machine can do them so fast and still put out such a nice surface.
> Because it is so nice I have decided not to black oxide them. I am told it
> is harder to hold a close tolerance on the puller that I wanted if they are
> machined first and than sent out to be coated. Hope I made the right choice.
> >
> >These things are very rugged as anyone who has the OTC-927 puller can
> attest to. This puller should be able to pull off even a welded on bearing
> race. doesn't make a difference whether the outside race is there or not.
> >
> >Will let everyone know when the first ones are available and will than
> start packing them and shipping them out in the order that I received
> checks. Will send them all UPS so you can track them.
> >
> >thanks for waiting and know you will be impressed with the quality of this
> tool.
> >
> >Tom
> >
>
> >Tom Warner ( Mr. GMC puller), What's the latest on the pullers?? Haven't
> >seen or heard anything since the final price was established and money was
> >sent.
> >
> >
> Tom & Marg Warner
> Vernon Center NY
> 1976 palmbeach
> "The beautiful Mohawk Vally"
than 20 of the address and those people did not receive the E-Mail
J.R. Wright
>
> Thom Hole. Sent this e-mail to everyone on the list including you. I only
> received two addresses that were returned because of bad e-mail addresses
> and yours was not one of them. Is this correct?
>
> >To: Michael.Andrews, Richard Bachert
> ,"Bartz, Paul" , herm
> beeck , "Chuck Blanford" Chuck.Blanford, ,Chuck
> Botts , "Bright, Walter"
> paa8394, Thomas T Clarke , Condos
> , Henry Davis , John Dolan
> , "Walter M. Drew" , DEvans753,
> Ken & Virginia Fitzgerald , "Frank Folkmann"
> , "Lanier Foot", "LELAND L GARLAND"
> ,"Mark Grady" ,Thom Hole
> , "G.M. Hope" gmhope,Ritch Hwang
> ,Jeff108740, Terry
> Krauskopf, D & D Lowry ,"Steve Magown" magown,
> Dave DGMDGM, Billy Massey bdub, "Bob McCarthy"
> , Marcus McGee ,"Donald W.
> Miller" millerdw, Gary Miller grizzly,"hemogoblin"
> ,William Myers wmyers442, "Loren (Skip)
> Newhouse" lnewh, Darren Paget paget, "hawk
> ii-Pete.Papas" , Bill & Joan Satterfield
> , Zachary Zehnacker zakz,"Terry & Skinner"
> fairwind, RickStapls,Phil Stewart
> ,EMERYSTORA, JAStruther,
> LARRYDTIMOTHY Tim>,"Tipton, Eric" ,Jim
> Walker , Richard Waters
> digitek,Jrwheeler7, "Dan Winchester"
> , "Heinz Wittenbecher" , John
> Wright ,F25CCapt,
> >From: Tom Warner
> >Subject: Bearing Puller update
> >
> >Was at my friends machine shop yesterday and was told he would have the
> first puller completed Monday. Others will be coming shortly thereafter.
> He had to order the 5 1/4" diameter 4140 pre-hard steel rod for them special
> and it should be here early next week.
> >
> >As i told you previously he is doing this for me as a favor and as a fill
> in to other contract jobs he has. I have really hated to push him any harder
> for completing the first ones. I hope every one understands. Got the first
> 2 adapters, one to assist in pulling the bearings off and the other insert
> to pull the bearing back on with the use of the OTC-927 puller. they are
> very very nice finish right off the CNC machine. It is hard to believe that
> the machine can do them so fast and still put out such a nice surface.
> Because it is so nice I have decided not to black oxide them. I am told it
> is harder to hold a close tolerance on the puller that I wanted if they are
> machined first and than sent out to be coated. Hope I made the right choice.
> >
> >These things are very rugged as anyone who has the OTC-927 puller can
> attest to. This puller should be able to pull off even a welded on bearing
> race. doesn't make a difference whether the outside race is there or not.
> >
> >Will let everyone know when the first ones are available and will than
> start packing them and shipping them out in the order that I received
> checks. Will send them all UPS so you can track them.
> >
> >thanks for waiting and know you will be impressed with the quality of this
> tool.
> >
> >Tom
> >
>
> >Tom Warner ( Mr. GMC puller), What's the latest on the pullers?? Haven't
> >seen or heard anything since the final price was established and money was
> >sent.
> >
> >
> Tom & Marg Warner
> Vernon Center NY
> 1976 palmbeach
> "The beautiful Mohawk Vally"
>I copied the e-mail addresses directly from each of your repsonses to me
Remember as has oft been said around here... That "John Dolan"
requirement is theory. Send another copy and change mine to read like
above and see if I get it.
- --
"I do whatever my Rice Krispies tell me to..." John said, from inside a
1974 Glacier.
Remember as has oft been said around here... That "John Dolan"
requirement is theory. Send another copy and change mine to read like
above and see if I get it.
- --
"I do whatever my Rice Krispies tell me to..." John said, from inside a
1974 Glacier.
>
>Tom, I didn't get the message either.
>
>
>Looks like that blew someones theory all to hell than Walter. your name
had quotation marks around it and was exactly like your e-mail address you
just used.
Return-Path: gmcmotorhome-owner-warner=borg.com
Delivered-To: gmcmotorhome
Date: Tue, 08 Jun 1999 22:27:15 -0600
From: "Walter M. Drew"
X-Accept-Language: en
To: gmcmotorhome
Subject: Re: GMC: update on pullers??
References:
Sender: owner-gmcmotorhome
Reply-To: gmcmotorhome
- --------------------------------------------
And here is the header off the e-mail I sent to everyone. Anyone else got
any ideas?
>To: Michael.Andrews, Richard Bachert
,"Bartz, Paul" , herm
beeck , "Chuck Blanford" Chuck.Blanford, ,Chuck
Botts , "Bright, Walter"
paa8394, Thomas T Clarke , Condos
, Henry Davis , John Dolan
, "Walter M. Drew" , DEvans753,
Ken & Virginia Fitzgerald , "Frank Folkmann"
, "Lanier Foot", "LELAND L GARLAND"
,"Mark Grady" ,Thom Hole
, "G.M. Hope" gmhope,Ritch Hwang
,Jeff108740, Terry
Krauskopf, D & D Lowry ,"Steve Magown" magown,
Dave DGMDGM, Billy Massey bdub, "Bob McCarthy"
, Marcus McGee ,"Donald W.
Miller" millerdw, Gary Miller grizzly,"hemogoblin"
,William Myers wmyers442, "Loren (Skip)
Newhouse" lnewh, Darren Paget paget, "hawk
ii-Pete.Papas" , Bill & Joan Satterfield
, Zachary Zehnacker zakz,"Terry & Skinner"
fairwind, RickStapls,Phil Stewart
,EMERYSTORA, JAStruther,
LARRYDTIMOTHY Tim>,"Tipton, Eric" ,Jim
Walker , Richard Waters
digitek,Jrwheeler7, "Dan Winchester"
, "Heinz Wittenbecher" , John
Wright ,F25CCapt,
>From: Tom Warner
>Subject: Bearing Puller update
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach
"The beautiful Mohawk Vally"
>Tom, I didn't get the message either.
>
>
>Looks like that blew someones theory all to hell than Walter. your name
had quotation marks around it and was exactly like your e-mail address you
just used.
Return-Path: gmcmotorhome-owner-warner=borg.com
Delivered-To: gmcmotorhome
Date: Tue, 08 Jun 1999 22:27:15 -0600
From: "Walter M. Drew"
X-Accept-Language: en
To: gmcmotorhome
Subject: Re: GMC: update on pullers??
References:
Sender: owner-gmcmotorhome
Reply-To: gmcmotorhome
- --------------------------------------------
And here is the header off the e-mail I sent to everyone. Anyone else got
any ideas?
>To: Michael.Andrews, Richard Bachert
,"Bartz, Paul" , herm
beeck , "Chuck Blanford" Chuck.Blanford, ,Chuck
Botts , "Bright, Walter"
paa8394, Thomas T Clarke , Condos
, Henry Davis , John Dolan
, "Walter M. Drew" , DEvans753,
Ken & Virginia Fitzgerald , "Frank Folkmann"
, "Lanier Foot", "LELAND L GARLAND"
,"Mark Grady" ,Thom Hole
, "G.M. Hope" gmhope,Ritch Hwang
,Jeff108740, Terry
Krauskopf, D & D Lowry ,"Steve Magown" magown,
Dave DGMDGM, Billy Massey bdub, "Bob McCarthy"
, Marcus McGee ,"Donald W.
Miller" millerdw, Gary Miller grizzly,"hemogoblin"
,William Myers wmyers442, "Loren (Skip)
Newhouse" lnewh, Darren Paget paget, "hawk
ii-Pete.Papas" , Bill & Joan Satterfield
, Zachary Zehnacker zakz,"Terry & Skinner"
fairwind, RickStapls,Phil Stewart
,EMERYSTORA, JAStruther,
LARRYDTIMOTHY Tim>,"Tipton, Eric" ,Jim
Walker , Richard Waters
digitek,Jrwheeler7, "Dan Winchester"
, "Heinz Wittenbecher" , John
Wright ,F25CCapt,
>From: Tom Warner
>Subject: Bearing Puller update
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach
"The beautiful Mohawk Vally"
Ritch Hwang's name is part of another address.
Hemogoblin address has a problem as well.
Maybe these screwed up the whole list ?
My name had quotes and I didnt get a copy either.
Don Miller
> >Looks like that blew someones theory all to hell than Walter. your name
> had quotation marks around it and was exactly like your e-mail address you
> just used.
>
> And here is the header off the e-mail I sent to everyone. Anyone else got
> any ideas?
>
> >To: Michael.Andrews, Richard Bachert
> ,"Bartz, Paul" , herm
> beeck , "Chuck Blanford" Chuck.Blanford,
,Chuck
> Botts , "Bright, Walter"
> paa8394, Thomas T Clarke , Condos
> , Henry Davis , John Dolan
> , "Walter M. Drew" , DEvans753,
> Ken & Virginia Fitzgerald , "Frank Folkmann"
> , "Lanier Foot", "LELAND L GARLAND"
> ,"Mark Grady" ,Thom Hole
> , "G.M. Hope" gmhope,Ritch Hwang
> ,Jeff108740, Terry
> Krauskopf, D & D Lowry ,"Steve Magown"
magown,
> Dave DGMDGM, Billy Massey bdub, "Bob McCarthy"
> , Marcus McGee ,"Donald W.
> Miller" millerdw, Gary Miller
grizzly,"hemogoblin"
> ,William Myers wmyers442, "Loren (Skip)
> Newhouse" lnewh, Darren Paget paget, "hawk
> ii-Pete.Papas" , Bill & Joan Satterfield
> , Zachary Zehnacker zakz,"Terry & Skinner"
> fairwind, RickStapls,Phil Stewart
> ,EMERYSTORA, JAStruther,
> LARRYDTIMOTHY Tim>,"Tipton, Eric"
,Jim
> Walker , Richard Waters
> digitek,Jrwheeler7, "Dan Winchester"
> , "Heinz Wittenbecher" ,
John
> Wright ,F25CCapt,
> >From: Tom Warner
> >Subject: Bearing Puller update
> >
> Tom & Marg Warner
> Vernon Center NY
> 1976 palmbeach
> "The beautiful Mohawk Vally"
Hemogoblin address has a problem as well.
Maybe these screwed up the whole list ?
My name had quotes and I didnt get a copy either.
Don Miller
> >Looks like that blew someones theory all to hell than Walter. your name
> had quotation marks around it and was exactly like your e-mail address you
> just used.
>
> And here is the header off the e-mail I sent to everyone. Anyone else got
> any ideas?
>
> >To: Michael.Andrews, Richard Bachert
> ,"Bartz, Paul" , herm
> beeck , "Chuck Blanford" Chuck.Blanford,
,Chuck
> Botts , "Bright, Walter"
> paa8394, Thomas T Clarke , Condos
> , Henry Davis , John Dolan
> , "Walter M. Drew" , DEvans753,
> Ken & Virginia Fitzgerald , "Frank Folkmann"
> , "Lanier Foot", "LELAND L GARLAND"
> ,"Mark Grady" ,Thom Hole
> , "G.M. Hope" gmhope,Ritch Hwang
> ,Jeff108740, Terry
> Krauskopf, D & D Lowry ,"Steve Magown"
magown,
> Dave DGMDGM, Billy Massey bdub, "Bob McCarthy"
> , Marcus McGee ,"Donald W.
> Miller" millerdw, Gary Miller
grizzly,"hemogoblin"
> ,William Myers wmyers442, "Loren (Skip)
> Newhouse" lnewh, Darren Paget paget, "hawk
> ii-Pete.Papas" , Bill & Joan Satterfield
> , Zachary Zehnacker zakz,"Terry & Skinner"
> fairwind, RickStapls,Phil Stewart
> ,EMERYSTORA, JAStruther,
> LARRYDTIMOTHY Tim>,"Tipton, Eric"
,Jim
> Walker , Richard Waters
> digitek,Jrwheeler7, "Dan Winchester"
> , "Heinz Wittenbecher" ,
John
> Wright ,F25CCapt,
> >From: Tom Warner
> >Subject: Bearing Puller update
> >
> Tom & Marg Warner
> Vernon Center NY
> 1976 palmbeach
> "The beautiful Mohawk Vally"
point is john your e-mail was taken directly from your e-mail to me. Look at
it! Noi quotations?
Return-Path: gmcmotorhome-owner-warner=borg.com
Delivered-To: gmcmotorhome
Date: Wed, 09 Jun 1999 11:05:05 -0700
From: John Dolan
To: gmcmotorhome
Subject: Re: GMC: update on pullers??
References:
Sender: owner-gmcmotorhome
Reply-To: gmcmotorhome
> I didn't get the message either.
>
>
>Looks like that blew someones theory all to hell than Walter. your name
>had quotation marks around it and was exactly like your e-mail address
>you just used.
I Dooooooo No?? We look a lot alike said tweetee bird.
I'm still betting on my theory... change my name to quotes and try it
again, which will test some of the other theories as well.
- --
"I do whatever my Rice Krispies tell me to..." John said, from inside a
1974 Glacier.
>> I didn't get the message either.
>>
>>
>>Looks like that blew someones theory all to hell than Walter. your name
>>had quotation marks around it and was exactly like your e-mail address
>>you just used.
>
>I Dooooooo No?? We look a lot alike said tweetee bird.
>
>I'm still betting on my theory... change my name to quotes and try it
>again, which will test some of the other theories as well.
>
>--
>"I do whatever my Rice Krispies tell me to..." John said, from inside a
>1974 Glacier.
>
>
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach
"The beautiful Mohawk Vally"
it! Noi quotations?
Return-Path: gmcmotorhome-owner-warner=borg.com
Delivered-To: gmcmotorhome
Date: Wed, 09 Jun 1999 11:05:05 -0700
From: John Dolan
To: gmcmotorhome
Subject: Re: GMC: update on pullers??
References:
Sender: owner-gmcmotorhome
Reply-To: gmcmotorhome
> I didn't get the message either.
>
>
>Looks like that blew someones theory all to hell than Walter. your name
>had quotation marks around it and was exactly like your e-mail address
>you just used.
I Dooooooo No?? We look a lot alike said tweetee bird.
I'm still betting on my theory... change my name to quotes and try it
again, which will test some of the other theories as well.
- --
"I do whatever my Rice Krispies tell me to..." John said, from inside a
1974 Glacier.
>> I didn't get the message either.
>>
>>
>>Looks like that blew someones theory all to hell than Walter. your name
>>had quotation marks around it and was exactly like your e-mail address
>>you just used.
>
>I Dooooooo No?? We look a lot alike said tweetee bird.
>
>I'm still betting on my theory... change my name to quotes and try it
>again, which will test some of the other theories as well.
>
>--
>"I do whatever my Rice Krispies tell me to..." John said, from inside a
>1974 Glacier.
>
>
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach
"The beautiful Mohawk Vally"
- -
>For info purpose only, I did not get the mass e-mail either. I had a
similar problem too when the direct mail went out for ordering the OT-927
tool. I got the info from someones post to this page. I did get your
message to my inquiry a week ago however. Hope this helps. walter bright,
76 GB.
>For info purpose only, I did not get the mass e-mail either. I had a
similar problem too when the direct mail went out for ordering the OT-927
tool. I got the info from someones post to this page. I did get your
message to my inquiry a week ago however. Hope this helps. walter bright,
76 GB.
> I didn't get the message either.
>
>
>Looks like that blew someones theory all to hell than Walter. your name
>had quotation marks around it and was exactly like your e-mail address
>you just used.
I Dooooooo No?? We look a lot alike said tweetee bird.
I'm still betting on my theory... change my name to quotes and try it
again, which will test some of the other theories as well.
- --
"I do whatever my Rice Krispies tell me to..." John said, from inside a
1974 Glacier.
>
>
>Looks like that blew someones theory all to hell than Walter. your name
>had quotation marks around it and was exactly like your e-mail address
>you just used.
I Dooooooo No?? We look a lot alike said tweetee bird.
I'm still betting on my theory... change my name to quotes and try it
again, which will test some of the other theories as well.
- --
"I do whatever my Rice Krispies tell me to..." John said, from inside a
1974 Glacier.
