Understand exactly what Arch got before you decide

T

thomas g. warner

New member
Mar 24, 1998
1,863
0
0
Excuse me guys but be careful. Arch tell them what you got with your roller
rocker kit and the exact mondello part numbers. Didn't you get modified
special length push rods and some other goodies?

>Arch,
>
>Thanks. That is good information. Others here will now know what you
>learned. Anyone else that wants this type of rocker can now pick up a Jegs
>catalog and order the kit and know they are getting the same thing Mondello
>uses. I sure hope nobody tries to say that Mondello gets only the cream of
>the Crane rocker crop :).
>
>Thanks,
>Zak
>
>
>
>

>>It was all in a kit. I am sorry for the off hand remark. They do look
>>like Chevy rockers though. Oh well yes one big kit---looked up Crane
>>would have been cheaper that way-----guess I paid for what Mondello
>>knows that I dont. Its ok there was so much confusion I decided to pay
>>to get it right. Think I did.
>>
>>Take Care
>>Arch PS thanks for confirming my decision on full on rollers.
>
>
>
 
Tom,

The Crane kit comes with the pushrods, guideplates, studs, etc
needed for the Olds 455 installation if bought as the Olds 455 kit from
Crane (through Jegs, Summit, etc).

Zak

>Excuse me guys but be careful. Arch tell them what you got with your roller
>rocker kit and the exact mondello part numbers. Didn't you get modified
>special length push rods and some other goodies?
 
Zak I cant honestly find them in my JEGS book. Got a part number for the kit?

>Tom,
>
> The Crane kit comes with the pushrods, guideplates, studs, etc
>needed for the Olds 455 installation if bought as the Olds 455 kit from
>Crane (through Jegs, Summit, etc).
>
>Zak
>

>>Excuse me guys but be careful. Arch tell them what you got with your roller
>>rocker kit and the exact mondello part numbers. Didn't you get modified
>>special length push rods and some other goodies?
>
>
>
 
For all of you that are interested you can find Crane Cams site at:
www.cranecams.com/CraneCams.htm

A lot of information is there.

J.R. Wright

>
> Zak I cant honestly find them in my JEGS book. Got a part number for the kit?
>

> >Tom,
> >
> > The Crane kit comes with the pushrods, guideplates, studs, etc
> >needed for the Olds 455 installation if bought as the Olds 455 kit from
> >Crane (through Jegs, Summit, etc).
> >
> >Zak
> >

> >>Excuse me guys but be careful. Arch tell them what you got with your roller
> >>rocker kit and the exact mondello part numbers. Didn't you get modified
> >>special length push rods and some other goodies?
> >
> >
> >
 
The set you have arch has special 9.900" x 5/16" oil restricted pushrods,

I think you made a good choice.

>In a message dated 10/14/99 11:23:55 PM Central Daylight Time,

>
>> Excuse me guys but be careful. Arch tell them what you got with your roller
>> rocker kit and the exact mondello part numbers. Didn't you get modified
>> special length push rods and some other goodies?
>>
>Tom
>
>I will be glad to tell you exactly what I got from Mondello. It is
>
>SAR-455 ROCKER ARM SET "C" $299.00
>
>Everything is typed just as it is on the bill. I cant say that I got anything
>special. The rockers, studs,pushrods and nuts were all in one box. Then
>they were sealed in by a thick plastic bag. Thats what I got.
>
>Take Care
>Arch
>
>
 
By the way Arch you got a good deal the set was $359

>In a message dated 10/14/99 11:23:55 PM Central Daylight Time,

>
>> Excuse me guys but be careful. Arch tell them what you got with your roller
>> rocker kit and the exact mondello part numbers. Didn't you get modified
>> special length push rods and some other goodies?
>>
>Tom
>
>I will be glad to tell you exactly what I got from Mondello. It is
>
>SAR-455 ROCKER ARM SET "C" $299.00
>
>Everything is typed just as it is on the bill. I cant say that I got anything
>special. The rockers, studs,pushrods and nuts were all in one box. Then
>they were sealed in by a thick plastic bag. Thats what I got.
>
>Take Care
>Arch
>
>
 
Arch what was the part # ror the rockers, and did you have to machine the
heads for studs or what?
Thanks
R/A
Bandon Or
- -----Original Message-----
From: Gcbr
To: gmcmotorhome
Date: Friday, October 15, 1999 5:45 AM
Subject: Re: GMC: Understand exactly what Arch got before you decide

>In a message dated 10/15/99 7:21:24 AM Central Daylight Time,
warner
>writes:
>
>> The set you have arch has special 9.900" x 5/16" oil restricted pushrods,
>>
>> I think you made a good choice.
>>
>Tom
>
>OMG first we agreed on the cam and now the rocker arm set.
>Thanks for the encouragement. I do often feel sort of alone out
>here. All I have to do is wait to get the report on the manifold.
>They said they might have it done by today or Monday for
>sure. One interesting thing I discovered when I looked the bill
>over again is that the lifters say LIFTERS ENGLE Does not
>say that on the cam. Thanks again.
>
>Take Care
>Arch
>
>Take Care
>Arch
>
 
Tom,

My fault. It is made by Comp Cams not Crane as I had stated. I must have
glanced at the Crane section of the page when I was writing the email. I
had the Magnum part right though. They are Comp Cams Magnum Rocker
Arms. The kit which includes the guideplates, studs & pushrods is part
number 249-1442-Kit and is $289.99 (used to be $279.99 in my old
catalog). To get only the rockers, you can order 249-1442-16 for $146.99,
but you will still need to get the rest of the stuff from somewhere. Comp
cams has a web site http://www.compcams.com that has these rockers listed
in their mini catalog (not the kit though). You can also download the
current copy of the Jeg's catalog from the downloads section of
http://www.jegs.com . You only need the "Cams & Engine" section
http://webserver.jegs.com/pdfdocs/holidaypdf/060_76.pdf (a little over 2
megs) if you want to get the information for these rockers. The rockers
are on page 71 of the catalog available there now. I see they also now
have a kit for the 350-403 Olds which is part number 249-1441-Kit and is
$277.99.

Sorry if this caused any confusion,
Zak

>Zak I cant honestly find them in my JEGS book. Got a part number for the kit?
>
>

> >Tom,
> >
> > The Crane kit comes with the pushrods, guideplates, studs, etc
> >needed for the Olds 455 installation if bought as the Olds 455 kit from
> >Crane (through Jegs, Summit, etc).
> >
> >Zak
> >

> >>Excuse me guys but be careful. Arch tell them what you got with your
> roller
> >>rocker kit and the exact mondello part numbers. Didn't you get modified
> >>special length push rods and some other goodies?
> >
> >
> >
 
You must log in or register to reply here.
Applied GMC
GMCMI Fall 2026 Rally

Share this page

Share this page
Top Bottom
Back