trans filter

[dave posey]

is there a recommended brand of transmission filter and what is its part
number?

 

[marlene meineken]

Transmission Filters

AC Delco PF-169
Atlas 131
Fram FT-1019
Motorcraft FT- 19
Purolator P-219
Union B-40
Wix 51882
Or ask for a GM 425 Transmission Filter

Marlene Meineken

- ----- Original Message -----
From: dave posey
To:
Sent: Wednesday, January 19, 2000 12:42 PM
Subject: GMC: trans filter

> is there a recommended brand of transmission filter and what is its part
> number?
>
>

 

[dave posey]

Thanks Marlene, I knew somebody out there would help. Dave, 76 PB, CA
- ----- Original Message -----
From: Marlene Meineken
To:
Sent: Wednesday, January 19, 2000 1:22 PM
Subject: Re: GMC: trans filter

> Transmission Filters
>
> AC Delco PF-169
> Atlas 131
> Fram FT-1019
> Motorcraft FT- 19
> Purolator P-219
> Union B-40
> Wix 51882
> Or ask for a GM 425 Transmission Filter
>
> Marlene Meineken
>
> ----- Original Message -----
> From: dave posey
> To:
> Sent: Wednesday, January 19, 2000 12:42 PM
> Subject: GMC: trans filter
>
>
> > is there a recommended brand of transmission filter and what is its part
> > number?
> >
> >
>
>

 

[philip l. stewart]

Dave, another filter is made by Sanginw, FK117. It is sold by Advance Auto
Parts in their automatic transmission filter kit, SKU The kit
comes with a Felpro gasket too. I use'em and the cost is about $20 for
both..Good luck.
Phil Stewart
'76 Tansmode, TN

> is there a recommended brand of transmission filter and what is its part
> number?

 

[nate chase]

Don't use the FRAM 1019 as I tried about three different ones and had
nothing but troubles. Seems the outlet where the o-ring goes was too big to
fit my tranny on all of them. There was three different vendors (don't
recall the names but FRAM) but they all had stamped steel bodies with steel
inlet and outlets (silver). Fought them for hours and short of pounding them
in place I decided not to use them.

The filters that work have COPPER inlet and outlet tubes with steel bodies.
If it's not copper then I steer clear of it now. Call Chuck Kokesh at (402)
592-7620 as he has some WIX ones that have the copper tubes and gasket that
work well for less than $20

Nate 75GB (semi-healed in) Omaha

PS. Saw my coach at the tranny shop yesterday. They showed me my cooked
plates and bands and should have it done today. I hope... At least the
weather is holding out and it's clear as a bell here. Good night for the
moon eclipse.

>>

Date: Wed, 19 Jan 2000 12:42:53 -0800
From: "dave posey"
Subject: GMC: trans filter

is there a recommended brand of transmission filter and what is its part
number?