Tools for turn signal switch replacement at GMCMI rally

RF_Burns

RF_Burns

Super Moderator
Staff member
Sep 7, 2008
5,184
1,377
113
Ontario Canada
Hi All
My turn signal switch does not latch for right turns, so I'm going to bring a replacement switch to the Mansfield Rally. Just wondering if anyone
going there has a steering wheel puller and the spring compressor tools needed to do the job.

Thanks

--
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
Hubler 1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
 
I should have those two in my coach hidden under my sofa. If not, we can always borrow one for free at a local AutoZone.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
 
> Hi All
> My turn signal switch does not latch for right turns, so I'm going to bring a replacement switch to the Mansfield Rally. Just wondering if anyone
> going there has a steering wheel puller and the spring compressor tools needed to do the job.
>
> Thanks

KenB has said he would and as this seems to be an on going demand and the set is small, I think I will load my set also.
I do my best to not carry more than I expect to need, but this rally is so close to us that I will make this exception.

See you there. I guess we are bringing the coach, I thought we might just walk.

Matt
--
Matt & Mary Colie - Members GMCMI, GMCGL, GMCES
'73 Glacier 23 - Still Loving OE Rear Drum Brake with Applied Control Arms
Now with both true Keyless and remote entry
SE Michigan - Twixt A2 and Detroit
 
Bring them Matt, just in case I forget to make sure mine are in the coach. Thanks
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
 
You must log in or register to reply here.
GMCMI Fall 2026 Rally
Applied GMC

Share this page

Share this page
Top Bottom
Back