Toll Window Felt Solved

[mark kasiewicz]

The felt I ordered did not come with any instructions. I looked in the
forum and found out that taking the metal extrusion off the sliding glass
was needed. Passenger side came off easily, driver's side only after much
(worrisome) pounding with a hammer and a block of maple flooring. Newly
sealed window work like a charm.

Thanks
Mark Kasiewicz
77 Kingsley (Gus da Bus)
Eau Claire, WI

 

[jim kanomata1]

Mark,
I'm sorry that we do not supply an instruction with the seals.
We felt that since none of the suppliers are not supplying instructions, we
would do the same.
We will start including instructions soon.
It is not good when we need to start doing things after customers have to
request things.
We are by far the major supplier of Parts and kits, so we should provide
more than the others.

On Sat, Apr 8, 2017 at 2:19 PM, Mark Kasiewicz
wrote:

> The felt I ordered did not come with any instructions. I looked in the
> forum and found out that taking the metal extrusion off the sliding glass
> was needed. Passenger side came off easily, driver's side only after much
> (worrisome) pounding with a hammer and a block of maple flooring. Newly
> sealed window work like a charm.
>
>
> Thanks
> Mark Kasiewicz
> 77 Kingsley (Gus da Bus)
> Eau Claire, WI
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk
http://www.appliedgmc.com
1-800-752-7502