I have new Michelins and they are inflated to 80 PSI and will stay that way.
Why? Because test results completed by Cinnabar engineering and funded by
General Tire concluded that only all steel tires inflated to 80PSI would
adequately control the GMC suspension without failures. It really amazes me
that we seem to come back to this same topic time after time after time,
even though all of the data has been posted and hashed over. The MINIMUM
pressure for an all steel E rated tire is 80 PSI for them to properly
function on a GMC motorhome.
TIRE DEALERS DEAL IN GENERAL TIRE TERMS AND THEREFORE RECOMMEND TIRES BASED
ON THE WEIGHT OF THE MOTORHOME AND NOT ON ITS ENGINEERING SPECIFICATIONS.
THE GMC MOTORHOME IS SIGNIFICANTLY DIFFERENT, FRONT WHEEL DRIVE AND A UNIQUE
REAR AIR SUSPENSION.
During the tests drivers could not tell the difference between 65 and 80PSI.
Bottom line and the last time. If you have run your E rated tires at 65 PSI
you may already have damaged them. Read the report and see the data.
Everyone can spend their hard earned money and do what they want.
>The last thing I want is to get a lengthy discussion going on theory or
manufacture hype so this is a question aimed at facts gained by experience
only please.
>
>And it's not asking advice on what I "should be" doing
, that may come
later.
>
>If you've been running tire pressures in the sixties and have gone to 80
lbs I'd very much appreciate your comments as to ride difference. Is it
harder/harsher?
>
>I'm currently running 65 on the new E's as was recommended by the tire
dealer. As he will get my complaints if he gave wrong advice I put
reasonable value to his advice, but....
>
>I've been runnning 65 since day 1, but on D's.
>
>The wear on the tires removed did not indicate under/over inflation.
>
>My E's are not squatting.
>
>I'm pondering the 80 lbs but it's one of those if it ain't broke I may want
to leave it alone.
>
>I'd especially like to hear if anyone has tried 80 and gone back. Don't be
shy ;-)
>
>Thanks
>
>Heinz
>Bakersfield, CA
>
>
>
Why? Because test results completed by Cinnabar engineering and funded by
General Tire concluded that only all steel tires inflated to 80PSI would
adequately control the GMC suspension without failures. It really amazes me
that we seem to come back to this same topic time after time after time,
even though all of the data has been posted and hashed over. The MINIMUM
pressure for an all steel E rated tire is 80 PSI for them to properly
function on a GMC motorhome.
TIRE DEALERS DEAL IN GENERAL TIRE TERMS AND THEREFORE RECOMMEND TIRES BASED
ON THE WEIGHT OF THE MOTORHOME AND NOT ON ITS ENGINEERING SPECIFICATIONS.
THE GMC MOTORHOME IS SIGNIFICANTLY DIFFERENT, FRONT WHEEL DRIVE AND A UNIQUE
REAR AIR SUSPENSION.
During the tests drivers could not tell the difference between 65 and 80PSI.
Bottom line and the last time. If you have run your E rated tires at 65 PSI
you may already have damaged them. Read the report and see the data.
Everyone can spend their hard earned money and do what they want.
>The last thing I want is to get a lengthy discussion going on theory or
manufacture hype so this is a question aimed at facts gained by experience
only please.
>
>And it's not asking advice on what I "should be" doing
later.
>
>If you've been running tire pressures in the sixties and have gone to 80
lbs I'd very much appreciate your comments as to ride difference. Is it
harder/harsher?
>
>I'm currently running 65 on the new E's as was recommended by the tire
dealer. As he will get my complaints if he gave wrong advice I put
reasonable value to his advice, but....
>
>I've been runnning 65 since day 1, but on D's.
>
>The wear on the tires removed did not indicate under/over inflation.
>
>My E's are not squatting.
>
>I'm pondering the 80 lbs but it's one of those if it ain't broke I may want
to leave it alone.
>
>I'd especially like to hear if anyone has tried 80 and gone back. Don't be
shy ;-)
>
>Thanks
>
>Heinz
>Bakersfield, CA
>
>
>