Gene,
In the alignment shop, Charly Mattson is the chief wizard. He has about 43
years in the business and he has one sweet shop and the help/expertiese to
go with it.
Frank, the owner/founder is the one that owned GMC's previously. He now has
the big beasty shown on the new hoist. (For Sale BTW as he has a new one
coming).
With ref to the pipe, I havn't been under the coach since I got home. That's
on tomorrows schedule. I did not hear any banging/clanging/vibration on the
1k trip home though.
2 hangers (rods) were welded onto the pipe just behind the mufflers. I think
that's it as far as hangers or contact with frame other than the muffler
grommets.
The gentleman that's making sure the muffler shop runs smoothly... his name
is Bob.
We'll see how it goes with time... BTW, the business has been around since
1962.
Heinz
'76 Transmode, Langley, BC
>-- [ From: Eugene Fisher * EMC.Ver #2.5.3 ] --
>
>Great pictures Heinz. First time I have seen Flowmasters.
>Al and I both have had a problem with our three inch systems at the
>corner after the mufflers where the pipe goes through the first frame
>hole.
>
>The pipe just after the elbow would bang on that first hole--- there
>was no bracket there like there is on the other holes. We had to have a
>welded bracket added. Have you heard anythng from that area? Or did
>he do something special ?
>
>What is the name of the 6 wheel allignment guy. He is in my area .
>Was he the same owner who owned 2 GMC ?
>
>gene 76pb/ca/or
>
In the alignment shop, Charly Mattson is the chief wizard. He has about 43
years in the business and he has one sweet shop and the help/expertiese to
go with it.
Frank, the owner/founder is the one that owned GMC's previously. He now has
the big beasty shown on the new hoist. (For Sale BTW as he has a new one
coming).
With ref to the pipe, I havn't been under the coach since I got home. That's
on tomorrows schedule. I did not hear any banging/clanging/vibration on the
1k trip home though.
2 hangers (rods) were welded onto the pipe just behind the mufflers. I think
that's it as far as hangers or contact with frame other than the muffler
grommets.
The gentleman that's making sure the muffler shop runs smoothly... his name
is Bob.
We'll see how it goes with time... BTW, the business has been around since
1962.
Heinz
'76 Transmode, Langley, BC
>-- [ From: Eugene Fisher * EMC.Ver #2.5.3 ] --
>
>Great pictures Heinz. First time I have seen Flowmasters.
>Al and I both have had a problem with our three inch systems at the
>corner after the mufflers where the pipe goes through the first frame
>hole.
>
>The pipe just after the elbow would bang on that first hole--- there
>was no bracket there like there is on the other holes. We had to have a
>welded bracket added. Have you heard anythng from that area? Or did
>he do something special ?
>
>What is the name of the 6 wheel allignment guy. He is in my area .
>Was he the same owner who owned 2 GMC ?
>
>gene 76pb/ca/or
>
