The correct water pump

[vic marks]

Patrick said:
How about a pix of that impeller. I have all the others on my web page but
I have never seen the correct one???

http://www.california.com/~eagle/watpump.html

Patrick: I'm confused by the captions on your water pump page. Your note
says the big guns such as Cinnabar, etc the cast impeller. The bottom pump
photo gives credit to Arch, and my understanding was that Arch got the pump
from Cinnabar, and this is the pump that Cinnabar now sells. Can you
clarify this?

Vic Marks
Vancouver, BC

 

[gene]

Hi this is Gene

I am at falt for this ;>)

Those are my notes, Arch's picture was the last I put up there and now
that you point this out, I guess we will have to ask Arch. I thought he
got this one from another vendor.

I know for sure that the TRW pumps are supplied by
Mondello----- My pump
Winterfield --Manny's pump

and I thought Cinnabar.

Caspro says they only use the 4.25 inch cast iron one.

Maybe Arch will come back on this one.

gene

>Patrick said:
>How about a pix of that impeller. I have all the others on my web page but
>I have never seen the correct one???
>
>
>http://www.california.com/~eagle/watpump.html
>
>Patrick: I'm confused by the captions on your water pump page. Your note
>says the big guns such as Cinnabar, etc the cast impeller. The bottom pump
>photo gives credit to Arch, and my understanding was that Arch got the pump
>from Cinnabar, and this is the pump that Cinnabar now sells. Can you
>clarify this?
>
>Vic Marks
>Vancouver, BC
>
>
>
>
Genef -- 77PB/ore/ca
GMC MOTORHOME INFORMATION
mr.erf
http://www.california.com/~eagle/

 

[patrick flowers]

Hmm, maybe somebody going to Rayne should take a ruler and check the
Caspro water pump impellor diameter if Chuck is there. Still haven't
checked my old water pump yet.

Patrick

>
> Caspro says they only use the 4.25 inch cast iron one.
>
- --
Patrick Flowers
Mailtoatrick

The GMC Motorhome Page
http://www.gmcmotorhome.com

 

[bdub]

I'll put a ruler on it if I get down there.

I sent a fax this morning to San Diego Pump Exchange asking about rebuild
cost and turn around time on the pump. I still haven't received a reply.

bdub

>Hmm, maybe somebody going to Rayne should take a ruler and check the
>Caspro water pump impellor diameter if Chuck is there. Still haven't
>checked my old water pump yet.
>
>Patrick
>

> >
> > Caspro says they only use the 4.25 inch cast iron one.
> >
>--
>Patrick Flowers
>Mailtoatrick
>
>The GMC Motorhome Page
>http://www.gmcmotorhome.com