swap meet

B

bartz paul

New member
Dec 3, 1997
1,225
0
0
Gene:

Anything wrong with getting them from the publisher???

Paul Bartz

From: JDDP32B [mailto:JDDP32B]
Sent: Thursday, May 20, 1999 8:00 PM
Subject: GMC: swap meet

I would like to buy the back issues of Motorhome Market Place. I need the
issues for the years of 1996, 1995,
 
I have the 2-way fridge out of our 75 Palm Beach. Replaced it with a 3-way.
It was working fine when removed, so if anybody is interested e-mail me
direct. I hate to just haul it to the dump.

Thanks

Dave Melton
1975 GMC
26' Palm Beach
Espanola N.M.
 
We're about to remodel the bathroom in our '76 Royale, and will be removing
and disposing both the bath tub and toilet. Both are "harvest gold" and in
good condition. In fact the toilet was completely rebuilt in early '98. If
interested, e-mail to dlowry

___________
Dave (& Dege), '76 Royale /_][__] [_] | "SR JAMES"
Santa Barbara, CA *0-------OO--* (our hobby)
 
I just installed my new 4-bag rear susppension system and shocks this
weekend and I have some parts maybe someone has some use for.

2 complete sets of original air bags with cones and nuts.

1 new never used original style air bag.

3 Monroe gas shocks for the rear.

2 Monroe gas shocks for the front.

2 Air bag shut off valves and fittings, bought from Jim Bounds 1 year ago.

Make me an offer on any of this equipment.

Dave Melton
1975 GMC
26' Palm Beach
Espanola N.M.
 
- -----Original Message-----
From: DAVE M., CST-7, 5-4682 [mailto:dlm]
Sent: Monday, June 07, 1999 10:05 AM
To: gmcmotorhome
Subject: GMC: SWAP MEET

1 new never used original style air bag.

Hi Dave; just tried to respond to your address but it did not work. I am
interested in buying the spare airbag. I bought one last week and could use
a second. You can also reach me at work at 800-441-1837, then ext. 737-5858.
Thanks, walter bright, 76 GB.
 
Oh sure. Now some one has bags. Timing is everything. Too bad, mine is mostly
wrong. Darren

> I just installed my new 4-bag rear susppension system and shocks this
> weekend and I have some parts maybe someone has some use for.
>
> 2 complete sets of original air bags with cones and nuts.
>
> 1 new never used original style air bag.
>
> 3 Monroe gas shocks for the rear.
>
> 2 Monroe gas shocks for the front.
>
> 2 Air bag shut off valves and fittings, bought from Jim Bounds 1 year ago.
>
> Make me an offer on any of this equipment.
>
> Dave Melton
> 1975 GMC
> 26' Palm Beach
> Espanola N.M.
 
Dave

Interested in new air bag - contact me
at mike

Mike F

- -----Original Message-----
From: owner-gmcmotorhome
[mailto:owner-gmcmotorhome]On Behalf Of DAVE M.,
CST-7,
5-4682
Sent: Monday, June 07, 1999 7:05 AM
To: gmcmotorhome
Subject: GMC: SWAP MEET

I just installed my new 4-bag rear susppension system and shocks
this
weekend and I have some parts maybe someone has some use for.

2 complete sets of original air bags with cones and nuts.

1 new never used original style air bag.

3 Monroe gas shocks for the rear.

2 Monroe gas shocks for the front.

2 Air bag shut off valves and fittings, bought from Jim Bounds 1
year ago.

Make me an offer on any of this equipment.

Dave Melton
1975 GMC
26' Palm Beach
Espanola N.M.
 
- --1 Dana dual cylinder compressor.....Rebuilt......?$?
- --2 oem cockpit seats with drop down arm rests.. very good blue
upholstery
- --oem dash guages..speedo cluster and gauge cluster. Both working
odometer registers 17000 m.
- --Dash accoutrements....fibreoptic cable..tell tale light
panel..headlight switch assembly..momentary battery crossover
switch..fuel switch over switch

That's all I can think of for now. Probably more later. Darren
 
Troops.......I already have this on Gene Fisher's site, but I'm not getting
any action. First, I have two of the stock front seats in real good
condition that I'll give to anyone who wants them. They don't have the
swivel base, just the two slides. They come out of my Coca Cola, so the
colors are red and white. You can always have them reupholstered. I won't
ship them, but if you want to come to Oregon, the most beautiful state in
the union, the price is right. Secondly, I need your old stock hubcaps. I
know a bunch of you that swapped over to Alcoas still have them in your
garage. Come on and sell them to me. Even if they're a little beat up, I
don't care!........Jim Davis, On the Oregon Coast where the sun has been
shining all day
 
-----Two newer style, completely rebuilt, new rubber,
resealed, new latches, freshly powder coated
satin black large sliding windows.
These are as good as brand new.
-- $175.00 each The frames for the screens
have been powder coated
also. New screening required.

Darren Paget
76 Experimental

Ideally, if any one was interested I will bring them to New Mexico in
October. Too expensive to ship. Too risky also.
 
Two, brand new in the box, rear OEM clearance lights. Bases and lenses.
$15.00. I will pay shipping. Bought them from Alex Sirums for
$10.00 each. Do not need them.
Darren Paget
paget
403-225-0282

- --
Darren Paget
76 Experimental
Another Fab Day
paget
 
Darren - I will take the lights if no one else has spoken for them yet

ron keener
4100 byron circle
leander texas 78641-8416

512-259-5098

1978 birch haven

i am assuming they are the stock ones with the wings

thanks

- --

ron keener near Austin, Texas http://MidAmericaBreedingTech.com
 
Gene,
Please delete all items shown on my offering #3.

I have the following items:

*** Fixed window curved to fit side wall of GMC 16
1/2" tall x 12 1/2" wide. Perfect for Transmode???
$25 plus shipping.

*** Dash cover from Danny Dunn. Used 6 months.
Royal blue. $20 plus shipping.

*** Clearance light lenses and a few usable bases.
Free plus shipping.

*** Tail light lenses (OEM) with metal trim. Very
good condition. $10 plus shipping for the pair.

Gary Miller grizzly North Bend,
Oregon
 
Troops.......Anyone out there have a driver's side, front wheel well liner?
Gary Miller said I will be shunned by the GMCers until I put mine back
in.....Jim Davis on the cool Oregon Coast
 
Any one interested in six new windows. 2 small, 2 medium, 2 large.
$500.00 Will bring to NM rally in October.

- --
Darren Paget
76 Experimental
Another Fab Day
paget
 
While I am at it. Two nicely covered cockpit seats with the drop down
arms(no bases) Original converter, Grill, Cabinets. If any one is
interested I can bring this to NM also.

- --
Darren Paget
76 Experimental
Another Fab Day
paget
 
Does some body even make those. If I could find something like that I would
have to get it. I think it would be tough with the triple directional curve in
the glass and frame. Sorry That isn't what I have. Darren

> In a message dated 8/17/99 5:58:43 PM Eastern Daylight Time,

>
> > Any one interested in six new windows
> Hi Darren!
>
> Don't think you have them but will ask!
> I would like Driver and Passenger windows that slide totally at top and
> bottom, therefore no dinky, itsy bitsy, small, stupid, 10" X 10" slider. I
> can't even make appropriate hand signels without dislocating my shoulder
> joint! When the time is right and you need to give a we willy, it is just
> too difficult.
>
> Scott NEHODA'S
> BACK YARD

- --
Darren Paget
76 Experimental
Another Fab Day
paget
 
Darren,
Are these the new style windows that open from the bottom and are the
tinted glass? I would be interested. Where do you like at?

J.R. Wright

>
> Any one interested in six new windows. 2 small, 2 medium, 2 large.
> $500.00 Will bring to NM rally in October.
>
> --
> Darren Paget
> 76 Experimental
> Another Fab Day
> paget
 
Gary

Where are you?

Wayne Newland F9300 75 Palm Beach Columbia, Md

> -- [ From: Eugene Fisher * EMC.Ver #3.1a PRODIGY ] --
>
> Thanks for keeping your stuff up to date. Changes have been made.
> gene
>
> -------- REPLY, Original message follows --------
>
> Date: Monday, 13-Sep-99 10:42 PM
>
> From: Gary Miller \ Internet: (grizzly)
> To: Eugene Fisher \ PRODIGY: (JDDP32B)
>
> Attachment: mimemsg.doc Code: 09VBDGL \ Created: Unknown [2 Kb]
>
> Subject: Swap Meet
>
> Please delete my stuff in Item 21. Replace with:
>
> Left over after converting my brakes to Harrison Discs:
>
> ''''Master Cylinder (original OEM)
> ''''Front Calipers (original OEM)
> In good working condiition when removed. You pay
> shipping plus $10, one or all.
> grizzly
>
> Thanks, Gene.
>
> Gary
>
> -------- REPLY, End of original message --------
>
> Gene 76Palm Beach /Or/CA
>
> GMC Technical Information
> http://www.california.com/~eagle/
 
You must log in or register to reply here.
Get your shine on at www.cruzingear.co
Applied GMC

Share this page

Share this page
Top Bottom
Back