Steering Relay Lever

[k7ujx1]

I have found mine to have a little movement up and down, when wiggling
the right front wheel. I see there are 2 bushings in this lever, and one
that slides inside from the bottom, to match up with the bolt.
Has any one come up with a good fix on this?

Gary Duvall WA.

________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

 

[robert shimanek]

>I have found mine to have a little movement up and down, when wiggling
>the right front wheel. I see there are 2 bushings in this lever, and one
>that slides inside from the bottom, to match up with the bolt.
>Has any one come up with a good fix on this?
>
>
>Gary Duvall WA.

Gary:

I replaced mine with no problem. When you get the new bushings the bolt
will not be able to be installed. I used a brake cylinder hone and honed
them to a tight fit. This corrected the play in the arm. Make sure you
keep it greased.

Bob 77 PB>
>________________________________________________________________
>YOU'RE PAYING TOO MUCH FOR THE INTERNET!
>Juno now offers FREE Internet Access!
>Try it today - there's no risk! For your FREE software, visit:
>http://dl.www.juno.com/get/tagj.
>
>