Tried replacing the rear crossover piece today. Couldn't find it in the set.
One minor disapointment is that the lines were not tagged in any way so it's
remove, and try to compare to find the right piece. The 2 that fit the
master cylinder are easy but the rest are a little tougher to pinpoint.
Of course it could be that my Transmode has different lines but according to
the parts book I didn't think so.
My crossover measures 58 1/2 inches long. No tube in the kit even close to
that length. I'll fax Classic Tube tonight as a double check but thought a
forwarn would be prudent.
Another caution... the old flare nuts did not remove easily. I'm planning to
replace the left rear tee and all unions after the problems encountered on
the rear tee.
( The tee's and rubber flexlines are getting replaced as part of the Disc
Brake enhance. First pics should be up later tonight. Grandson's birthday
had more priority
Heinz - www.bytedesigns.com/gmc
One minor disapointment is that the lines were not tagged in any way so it's
remove, and try to compare to find the right piece. The 2 that fit the
master cylinder are easy but the rest are a little tougher to pinpoint.
Of course it could be that my Transmode has different lines but according to
the parts book I didn't think so.
My crossover measures 58 1/2 inches long. No tube in the kit even close to
that length. I'll fax Classic Tube tonight as a double check but thought a
forwarn would be prudent.
Another caution... the old flare nuts did not remove easily. I'm planning to
replace the left rear tee and all unions after the problems encountered on
the rear tee.
( The tee's and rubber flexlines are getting replaced as part of the Disc
Brake enhance. First pics should be up later tonight. Grandson's birthday
had more priority
Heinz - www.bytedesigns.com/gmc
