SIDE ENGINE VENTS

[richard guthart]

Scott:

I just installed some stainless side vents that I got from Jim Bounds. They
come with a diagram showing exactly where to cut into the side panels. No
problems whatsoever.

Richard Guthart
'77 Birchaven

>LOOKING TO PUT SIDE ENGINE VENTS IN MOTORHOME. ANY SUGGESTIONS?
>PROBLEMS ENCOUNTERED?
>CONSTRUCTION?
>HOW FAR AWAY ARE THE MOUNTING HOLES FROM THE CUT?
>CONCERNED ABOUT BEING TOO CLOSE.
>
>THANKS
>
>Scott Nehoda
>

 

[richard guthart]

Scott:

I just installed some stainless side vents that I got from Jim Bounds. =
They
come with a diagram showing exactly where to cut into the side panels. =
No
problems whatsoever.

who is Jim Bounds? Are those the the cool looking ones? how much did they=
cost?

Terry Skinner
newbee GMC Owner

 

[thomas g. warner]

How much?

>Scott:
>
>I just installed some stainless side vents that I got from Jim Bounds. They
>come with a diagram showing exactly where to cut into the side panels. No
>problems whatsoever.
>
>Richard Guthart
>'77 Birchaven
>
>>LOOKING TO PUT SIDE ENGINE VENTS IN MOTORHOME. ANY SUGGESTIONS?
>>PROBLEMS ENCOUNTERED?
>>CONSTRUCTION?
>>HOW FAR AWAY ARE THE MOUNTING HOLES FROM THE CUT?
>>CONCERNED ABOUT BEING TOO CLOSE.
>>
>>THANKS
>>
>>Scott Nehoda
>>
>
>
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach

 

[john wright]

Scott,
The most popular vents that you will see on the GMC's are sold by
Caspro-GMC (800-877-1911). I belong to the GMC Greatlakers and most of
the coaches have installed these vents. They are stainless steel and
come with hardware and instructions.

 

[chuck will]

Originally used on inboard motor boats. Chuck

> Scott,
> The most popular vents that you will see on the GMC's are sold by
> Caspro-GMC (800-877-1911). I belong to the GMC Greatlakers and most of
> the coaches have installed these vents. They are stainless steel and
> come with hardware and instructions.

 

[richard guthart]

Tom, I did not save the receipt but it seems to me they were a little less
than the ones in the Caspro catelogue.

Dick

>How much?
>

>>Scott:
>>
>>I just installed some stainless side vents that I got from Jim Bounds.
They
>>come with a diagram showing exactly where to cut into the side panels. No
>>problems whatsoever.

 

[mr.c]

I bought some side engine vents that I got from Norm Karsh. Very tricky
to keep them within the space that is behind the wheel well and the
firewall. I added some fans that I got from Norm and it makes a lot of
noise, but it does move lots of air from the engine compartment.

Regards
Al Chernoff

> LOOKING TO PUT SIDE ENGINE VENTS IN MOTORHOME. ANY SUGGESTIONS?
> PROBLEMS ENCOUNTERED?
> CONSTRUCTION?
> HOW FAR AWAY ARE THE MOUNTING HOLES FROM THE CUT?
> CONCERNED ABOUT BEING TOO CLOSE.
>
> THANKS
>
> Scott Nehoda