[ADMIN note - This post was HTML encoded. Please post in "plain text"
only. Patrick]
SRCHRIS was trying to locate myself re putting in an access door behind
the license plate in an article in June 1997 Marketplace. I cannot
reach Cris at his stated Email,so maybe he would contact me direct at
cbrousson
Re the Accuride stabilizer bars--while I know nothing about them, I
noted Jim Bounds words of caution from his experience. I would think
that it would be important to only try and mount them if the rear pins
didn't have slop in them and if the rear wheels were in alignment. As
well it would seem that the brackets should have some adjustment built
into the design as spaceing from vehicle to vehicle will vary. In the
third picture that Many shows of them it appeared that adjustment could
be a possibility. Would these sway bars put extra stresses on the
frame? Who knows .
Claude
only. Patrick]
SRCHRIS was trying to locate myself re putting in an access door behind
the license plate in an article in June 1997 Marketplace. I cannot
reach Cris at his stated Email,so maybe he would contact me direct at
cbrousson
Re the Accuride stabilizer bars--while I know nothing about them, I
noted Jim Bounds words of caution from his experience. I would think
that it would be important to only try and mount them if the rear pins
didn't have slop in them and if the rear wheels were in alignment. As
well it would seem that the brackets should have some adjustment built
into the design as spaceing from vehicle to vehicle will vary. In the
third picture that Many shows of them it appeared that adjustment could
be a possibility. Would these sway bars put extra stresses on the
frame? Who knows .
Claude
