Sewer Pipe

[jim d.]

Im assuming alot of you guys are running macerators if you not you have the pipe rerouted to the driver side. Mine is still coming directly out of the
back and with the hitch and the bikes on the back it is becoming more and more of chore to empty the tank. Can anyone tell me the angles for the
elbows ill need to make it so i can reroute the pipe to the side. I just dont want to have to go in and out of store a hundred times to get it right.
Or if anyone has any better ways of routing the pipe im open for suggestions, but we are constantly moving so nothing with to much down time.

Thanks from the GMC Nomads
--
Jim DeMellia and Jen Radefeld and our cat Ickis
NH natives
1975 GMC “Palm Beach” ,455, her names Linda
Full time RVers exploring the beautiful and unusual parts of the country.

 

[robert mueller]

Jim,

Here's a link to the macerator installation I did at Jim Bounds Coop on my Avion, view the photo titled "Before Macerator Installation" first.

http://www.gmcmhphotos.com/photos/g6528-macerator-install.html

Unfortunately I don't have a list of the fittings.

Regards,
Rob M.
The Pedantic Mechanic
Sydney, Australia
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
USA '77 Kingsley - TZE 267V100808


-----Original Message-----
From: Gmclist [mailto:gmclist-bounces] On Behalf Of Jim D.
Sent: Monday, January 29, 2018 4:56 AM
To: gmclist
Subject: [GMCnet] Sewer Pipe

Im assuming alot of you guys are running macerators if you not you have the pipe rerouted to the driver side. Mine is still coming directly out of the back and with the hitch and the bikes on the back it is becoming more and more of chore to empty the tank. Can anyone tell me the angles for the elbows ill need to make it so i can reroute the pipe to the side. I just dont want to have to go in and out of store a hundred times to get it right.
Or if anyone has any better ways of routing the pipe im open for suggestions, but we are constantly moving so nothing with to much down time.

Thanks from the GMC Nomads
--
Jim DeMellia and Jen Radefeld and our cat Ickis

 

[jim kanomata1]

You can go to our web site and see what we supply and copy it and we also
have instrution sheet under instruction.
Use the RV fittings as they have sharper beds.
Any questions, call me and I'll give you FREE consultation.

On Sun, Jan 28, 2018 at 11:40 AM, Rob Mueller
wrote:

> Jim,
>
> Here's a link to the macerator installation I did at Jim Bounds Coop on my
> Avion, view the photo titled "Before Macerator Installation" first.
>
> http://www.gmcmhphotos.com/photos/g6528-macerator-install.html
>
> Unfortunately I don't have a list of the fittings.
>
> Regards,
> Rob M.
> The Pedantic Mechanic
> Sydney, Australia
> AUS '75 Avion - The Blue Streak TZE365V100428
> USA '75 Avion - Double Trouble TZE365V100426
> USA '77 Kingsley - TZE 267V100808
>
>
> -----Original Message-----
> From: Gmclist [mailto:gmclist-bounces] On Behalf Of Jim D.
> Sent: Monday, January 29, 2018 4:56 AM
> To: gmclist
> Subject: [GMCnet] Sewer Pipe
>
> Im assuming alot of you guys are running macerators if you not you have
> the pipe rerouted to the driver side. Mine is still coming directly out of
> the back and with the hitch and the bikes on the back it is becoming more
> and more of chore to empty the tank. Can anyone tell me the angles for the
> elbows ill need to make it so i can reroute the pipe to the side. I just
> dont want to have to go in and out of store a hundred times to get it right.
> Or if anyone has any better ways of routing the pipe im open for
> suggestions, but we are constantly moving so nothing with to much down time.
>
> Thanks from the GMC Nomads
> --
> Jim DeMellia and Jen Radefeld and our cat Ickis
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502

 

[jim d.]

Thanks guys and Jim appreciate the help sir.
--
Jim DeMellia and Jen Radefeld and our cat Ickis
NH natives
1975 GMC “Palm Beach” ,455, her names Linda
Full time RVers exploring the beautiful and unusual parts of the country.

 

[jim d.]

So I got a chance to poke around your site Jim and thanks for the info. But I think I wasn't very clear as to what I was looking for but excuse my
remedial drawing. I was hoping someone had info on the sewer pipe being discharged from the driver side of the rig.
Thanks the nomads
--
Jim DeMellia and Jen Radefeld and our cat Ickis
NH natives
1975 GMC “Palm Beach” ,455, her names Linda
Full time RVers exploring the beautiful and unusual parts of the country.

 

[jim kanomata1]

​Please keep in mind that you need to consider groung clearace.
Should you have any questions , call me on our toll free line and I can
explain how and why. 800-752-7502, your never required to purchase anything
from us, as I never look at who orders what as there is too much going on
here. I enjoy assisting our fellow GMC owners.​

> So I got a chance to poke around your site Jim and thanks for the info.
> But I think I wasn't very clear as to what I was looking for but excuse my
> remedial drawing. I was hoping someone had info on the sewer pipe being
> discharged from the driver side of the rig.
> Thanks the nomads
> --
> Jim DeMellia and Jen Radefeld and our cat Ickis
> NH natives
> 1975 GMC “Palm Beach” ,455, her names Linda
> Full time RVers exploring the beautiful and unusual parts of the country.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502

 

[Matt Colie]

Jimmy,

Do you have all the books?

The original dump pipe is just about centered and is held up by a rubber stretchy strap.

It is allowed to swing down because there is an O-ring sealed threaded joint between the two elbows. There is a 22-1/2 bend after that and the two
elbow joint can be flipped over (if it is not all glued in place), then you can do what ever creative plumbing you choose. I don't believe anybody
has packaged a kit for this.

Matt
--
Matt & Mary Colie - '73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan
OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Twixt A2 and Detroit