>
> My 76 Glenbrook is belching black stuff out the exhaust, the sparkers are
> real black and it does not pull real hard any more.
>
Emery, Duane, Larry N, Gene, Jim, Ritch, Terry, Larry C - Thanks so Very
Much
to you guys and everyone else who contributes to this wonderful forum.
Without all of you I would not nearly as far or knowledgeable in my
restoration project. THANKS
The problem has been solved and it was the power piston. The power piston
retaining ring/rubber seal was week and the spring would push it out in a
manner of a few seconds if not held in. Therefore, the power piston rod
holders were bent and the metering rods where not even in the jets, so no
metering and very rich. Repaired / replaced and now running great. THANKS
Rich - 76 Glenbrook
At the Castle in Colorado (Sunny today in more ways than one)
> My 76 Glenbrook is belching black stuff out the exhaust, the sparkers are
> real black and it does not pull real hard any more.
>
Emery, Duane, Larry N, Gene, Jim, Ritch, Terry, Larry C - Thanks so Very
Much
to you guys and everyone else who contributes to this wonderful forum.
Without all of you I would not nearly as far or knowledgeable in my
restoration project. THANKS
The problem has been solved and it was the power piston. The power piston
retaining ring/rubber seal was week and the spring would push it out in a
manner of a few seconds if not held in. Therefore, the power piston rod
holders were bent and the metering rods where not even in the jets, so no
metering and very rich. Repaired / replaced and now running great. THANKS
Rich - 76 Glenbrook
At the Castle in Colorado (Sunny today in more ways than one)
