Replacement seat belts ??

steve & debbie

New member
Jun 9, 2011
415
0
0
Hello all,
Does anyone know of a good seat belt maker. Would like to get the old ones replaced.

cheers and beers
--
Steve & Debbie
Monticello, FL
77 Palm Beach :- Aurora
EX G4WDT
 
Jack,
Did you order the shoulder or just the lap belt.

On Fri, Mar 23, 2012 at 8:51 PM, Jack Christensen wrote:

>
>
> I got belts from these folks. They have a wide selection and, as I
> recall, they came reasonably quickly.
> http://www.andoauto.com/SBL1.htm
> --
> Jack Christensen - K6ROW,
> '76 Glenbrook/Clasco - "The Silver Bullet",
> '65 Clark Cortez,
> Sebastopol, CA
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

--
Bruce Hart
1976 Palm Beach
Milliken, Co
 
> Hello all,
> Does anyone know of a good seat belt maker. Would like to get the old ones replaced.
>
> cheers and beers


There is also Juliano's Hot Rod Parts. They now have a separate website for their seat belts.

http://www.seatbeltstore.com/
--
Mike K.
'75 PB
Southeast Michigan
 
Any help or advise for installing three point belt for Drive and Passenger seats

William Cornell
76 Eleganza
Ft Myers, Fl

________________________________
From: Bruce Hart
To: gmclist
Sent: Saturday, March 24, 2012 6:47 AM
Subject: Re: [GMCnet] Replacement seat belts ??

Jack,
Did you order the shoulder or just the lap belt.

On Fri, Mar 23, 2012 at 8:51 PM, Jack Christensen wrote:

>
>
> I got belts from these folks.  They have a wide selection and, as I
> recall, they came reasonably quickly.
> http://www.andoauto.com/SBL1.htm
> --
> Jack Christensen - K6ROW,
> '76 Glenbrook/Clasco - "The Silver Bullet",
> '65 Clark Cortez,
> Sebastopol, CA
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

--
Bruce Hart
1976 Palm Beach
Milliken, Co
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
 
Here go
http://www.gmcmhphotos.com/photos/showgallery.php?cat=3599
Gene

FREE WIFI @ Mickey D



> Any help or advise for installing three point belt for Drive and Passenger seats
>
> William Cornell
> 76 Eleganza
> Ft Myers, Fl
>
>
> ________________________________
> From: Bruce Hart
> To: gmclist
> Sent: Saturday, March 24, 2012 6:47 AM
> Subject: Re: [GMCnet] Replacement seat belts ??
>
> Jack,
> Did you order the shoulder or just the lap belt.
>
> On Fri, Mar 23, 2012 at 8:51 PM, Jack Christensen wrote:
>
>>
>>
>> I got belts from these folks. They have a wide selection and, as I
>> recall, they came reasonably quickly.
>> http://www.andoauto.com/SBL1.htm
>> --
>> Jack Christensen - K6ROW,
>> '76 Glenbrook/Clasco - "The Silver Bullet",
>> '65 Clark Cortez,
>> Sebastopol, CA
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>
>
>
> --
> Bruce Hart
> 1976 Palm Beach
> Milliken, Co
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
 
There was some previous wisdom and pictures floating around here that says NOT to. There were pics of a wreck where the the coach separated at the beltline and those in the cockpit were OK. 3 point may have been detremental. GM didn't crash test TZE that way with 3 points so lots of unknowns and lots of missing data.
--
John Lebetski
Chicago, IL
77 Eleganza II
Source America First
 
I wouldn't advise trying to attach anything to the upper shell, even if it looks plenty sturdy. I would think you'd need a seat-mounted shoulder harness design and that would require some engineering to the floor.

Check out some ideas the FAA has concerning shoulder harness design and installation

http://
--
Randy
1973 26' Painted Desert
Ahwatukee (Phoenix) AZ
 
Randy,

Were you intending to add a link at the bottom of your post?
.

Greg H.

I don't just march to the beat of my own drum - I have an entire brass band
to keep me company.

.
----- Original Message -----
From: "Randy"
To:
Sent: Saturday, March 24, 2012 23:49
Subject: Re: [GMCnet] Replacement seat belts ??

>
>
> I wouldn't advise trying to attach anything to the upper shell, even if it
> looks plenty sturdy. I would think you'd need a seat-mounted shoulder
> harness design and that would require some engineering to the floor.
>
> Check out some ideas the FAA has concerning shoulder harness design and
> installation
>
> http://
> --
> Randy
> 1973 26' Painted Desert
> Ahwatukee (Phoenix) AZ
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist