Hi Paul,
Re item #3, it seems the filter can has an indentation on it for the HEI
unit. Maybe someone can tell you if the filter mount dimensions are the
same on early and late models then you just need to find an air filter
that will accommodate the HEI unit.
If they are the same, I know Alex Sirum GMC inFlorida has some or you may
find one closer to home.
Thanks for the info for the Registry. If you know anything about the
previous owners drop me a personal email.
Thanks,
David Lee Greenberg
GMC Motorhome Registry
200 MacFarlane Drive
Delray Beach, FL 33483-6829
>I am finally getting time to work on my 73 Glacier and have run into a
>
>couple of areas new and puzzling to me, actually this being my first
>coach there is alot I am going to have to learn. Here is my current
>list
>of trouble items:
>
>1) The onan seems like it wants to start but has no spark, even at the
>points. Any suggestions where I should trouble shoot next?
>
>2) I reconnected the power level air lines to the rear bags, it had
>valve stems inplace of the air hose, and now it appears my air pump is
>not presurizing. The pump runs constantly, how can I test/repair this?
>In the mean time I used my air compressor to fill the air tank by the
>front wheel and the valves seem to work OK.
>
>3) The vacuum advance was not working and I failed emmissions, so I
>decided to install a HEI that was given to me. It worked very well
>after
>a bit of effort putting it in place and getting it timed, But now I
>have
>a clearance problem with the air filter. I managed to pound the side
>of
>the air scoop in a bit but I am afraid it does not fit on the carb as
>snugly as it did before. Is there a smaller air filter I should use or
>how does one resolve the clearance problem?
>
>I have many more things to ask about but I will wait so this won't get
>to lengthy. For the registry my vin is TZE063V100287.
>
>Paul Winchester
>3220 S 162nd St
>Seatac WA 98188
>206-248-6827
>
Re item #3, it seems the filter can has an indentation on it for the HEI
unit. Maybe someone can tell you if the filter mount dimensions are the
same on early and late models then you just need to find an air filter
that will accommodate the HEI unit.
If they are the same, I know Alex Sirum GMC inFlorida has some or you may
find one closer to home.
Thanks for the info for the Registry. If you know anything about the
previous owners drop me a personal email.
Thanks,
David Lee Greenberg
GMC Motorhome Registry
200 MacFarlane Drive
Delray Beach, FL 33483-6829
>I am finally getting time to work on my 73 Glacier and have run into a
>
>couple of areas new and puzzling to me, actually this being my first
>coach there is alot I am going to have to learn. Here is my current
>list
>of trouble items:
>
>1) The onan seems like it wants to start but has no spark, even at the
>points. Any suggestions where I should trouble shoot next?
>
>2) I reconnected the power level air lines to the rear bags, it had
>valve stems inplace of the air hose, and now it appears my air pump is
>not presurizing. The pump runs constantly, how can I test/repair this?
>In the mean time I used my air compressor to fill the air tank by the
>front wheel and the valves seem to work OK.
>
>3) The vacuum advance was not working and I failed emmissions, so I
>decided to install a HEI that was given to me. It worked very well
>after
>a bit of effort putting it in place and getting it timed, But now I
>have
>a clearance problem with the air filter. I managed to pound the side
>of
>the air scoop in a bit but I am afraid it does not fit on the carb as
>snugly as it did before. Is there a smaller air filter I should use or
>how does one resolve the clearance problem?
>
>I have many more things to ask about but I will wait so this won't get
>to lengthy. For the registry my vin is TZE063V100287.
>
>Paul Winchester
>3220 S 162nd St
>Seatac WA 98188
>206-248-6827
>
