Thanks Emery, it was me.
Seems like best left when doing the works.
Heinz
- -----Original Message-----
From: EMERYSTORA
To: gmcmotorhome
Date: Saturday, May 08, 1999 1:17 PM
Subject: GMC: Remove oil pan while engine is still in
>Someone had recently asked if the oil pan could be taken off the engine
>without removing the engine. Page 6A-42 of the Maintenance Manual X-7525
and
>page 6A-43 of X-7725 have instructions for removing the oil pan. It is not
>easy but it can be done without removing the engine. It starts out: "Step
1.
> Remove transmission and final drive." Step 9 calls for: "Raise front of
>engine enough so the oil pan can be removed (approximately one inch)."
>
>Emery Stora
>77 Kingsley
>Santa Fe, NM
>
>
Seems like best left when doing the works.
Heinz
- -----Original Message-----
From: EMERYSTORA
To: gmcmotorhome
Date: Saturday, May 08, 1999 1:17 PM
Subject: GMC: Remove oil pan while engine is still in
>Someone had recently asked if the oil pan could be taken off the engine
>without removing the engine. Page 6A-42 of the Maintenance Manual X-7525
and
>page 6A-43 of X-7725 have instructions for removing the oil pan. It is not
>easy but it can be done without removing the engine. It starts out: "Step
1.
> Remove transmission and final drive." Step 9 calls for: "Raise front of
>engine enough so the oil pan can be removed (approximately one inch)."
>
>Emery Stora
>77 Kingsley
>Santa Fe, NM
>
>
