Hi all,
My recently purchased but interior gutted '74 Eleganza came with a
Norcold 778-EG2 propane / 110 volt refrigerator.
Plugging it into AC power it draws about 300 watts but instead of the
interior getting colder it gets warmer, even after letting it run for a
couple of days. It does however make gurgling and farting noises which
are endlessly entertaining.
I'm guessing it is kaput. If it's not, tell me now.
I saw the JC Refrigeration retrofit to 12 volt compressor video but it
looks like my refrigeration unit is integral to the refrigerator
cabinet, not easily removed and replaced.
So, if 'kaput' is the correct diagnosis I plan on taking it to the dump
and eventually installing a newer, more efficient unit when the time comes.
Does that seem like the best route or is there any ridiculous hope of
(or any good reason to) salvaging the cabinet (which isn't in the best
shape anyway)? There is no existing cabinetry in the rig so designing
the new cabinets to fit a modern icebox would be relatively easy.
Thanks in advance for any advice,
Stu
I have heard it suggested that if you tried to get a gasoline powered
automobile through regulatory approval now, as a new concept, you'd
never get approval. "You want to have a thin steel tank full of
explosive hydrocarbons in thousands of machines driven by relatively
untrained people! Are you crazy???" - Stuart Wheaton
My recently purchased but interior gutted '74 Eleganza came with a
Norcold 778-EG2 propane / 110 volt refrigerator.
Plugging it into AC power it draws about 300 watts but instead of the
interior getting colder it gets warmer, even after letting it run for a
couple of days. It does however make gurgling and farting noises which
are endlessly entertaining.
I'm guessing it is kaput. If it's not, tell me now.
I saw the JC Refrigeration retrofit to 12 volt compressor video but it
looks like my refrigeration unit is integral to the refrigerator
cabinet, not easily removed and replaced.
So, if 'kaput' is the correct diagnosis I plan on taking it to the dump
and eventually installing a newer, more efficient unit when the time comes.
Does that seem like the best route or is there any ridiculous hope of
(or any good reason to) salvaging the cabinet (which isn't in the best
shape anyway)? There is no existing cabinetry in the rig so designing
the new cabinets to fit a modern icebox would be relatively easy.
Thanks in advance for any advice,
Stu
I have heard it suggested that if you tried to get a gasoline powered
automobile through regulatory approval now, as a new concept, you'd
never get approval. "You want to have a thin steel tank full of
explosive hydrocarbons in thousands of machines driven by relatively
untrained people! Are you crazy???" - Stuart Wheaton