Hi,
I'm hoping to change my faulty turn signal switch at Mansfield. The GMCMI cross-reference says Wells SW326 or SW327, but photos each of these shows a
different electrial connector. My local parts store carries Standard Products brand and his cross from the Delco 1995976 is to a TW20. But neither
of the Wells numbers cross to the TW20.
Any insight?
thanks
--
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
Hubler 1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
I'm hoping to change my faulty turn signal switch at Mansfield. The GMCMI cross-reference says Wells SW326 or SW327, but photos each of these shows a
different electrial connector. My local parts store carries Standard Products brand and his cross from the Delco 1995976 is to a TW20. But neither
of the Wells numbers cross to the TW20.
Any insight?
thanks
--
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
Hubler 1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that