Rear

[G&Rs66]

I installed a through the bumper hitch and in doing so the right half of the bumper was way off. When checking deeper into the problem I discovered my bracket was bent. When I bought the coach the bumper was bent up but it did not hurt anything so i did not worry about it. But now to get it right I need a bracket for the right side(pass) I'm sorry but i feel $95 is a bit mush. so I have come here please accept my Apology Applied. If anyone has one for sale please let me know.

Thank You and to every one Have a great day
Gene

 

[tmsnyder]

I installed a through the bumper hitch and in doing so the right half of the bumper was way off. When checking deeper into the problem I discovered my bracket was bent. When I bought the coach the bumper was bent up but it did not hurt anything so i did not worry about it. But now to get it right I need a bracket for the right side(pass) I'm sorry but i feel $95 is a bit mush. so I have come here please accept my Apology Applied. If anyone has one for sale please let me know.

Thank You and to every one Have a great day
Gene

Can you post a picture of the bracket ?

 

[Bhart]

Try Sirum in Florida.
Where do you live?

 

[G&Rs66]

I live in central Wisconsin

 

[tmsnyder]

Did you try hitting it with a BFH?

 

[Bhart]

Take the left side off as a pattern and go to a welding shop, have someone there take a BFH to it if you don't have the equipment to do it.

 

[Richard RV]

I live in central Wisconsin

That's not too bad. A come-along with one end attached to an appropriate & stout fixing point, like the far side of the rear cross member or even a tree, would be easy enough and you could coax it back into position. Do it a little at a time, back it off and check a few times - you'll have to bend it a bit further than the final position due to spring back.

 

[dsmithy]

I see the same thing the previous three posters see, that you have a definite owner fixable problem. Either a come-along to a nearby large tree of a (B)ig (F)--king (H)ammer would solve your problem.

 

[G&Rs66]

Yep I have already been thinking of all of that. I have an email into Sirum i will see what they have. I just thought that some one here might have some spare parts lying around.