I can not find the part numbers for rear wheel bearings anywhere in my manual 1978 Eleganza. Can I get some help please?
Thanks
Thanks
Rear Wheel Bearings
- Thread starter henrythorrez
- Start date
Two ways that I know of to find accurate replacement bearing numbers are to
remove and thoroughly clean your old bearings, and read the numbers off of
them along with the brand name, (best way)
And the second would be, to look in the GMC parts manual (not the
shop repair manual) and find the number there.
Or join GMCMI and look in their parts publications that is updated
annually or nearly that. Probably a good suggestion if you plan on keeping
your coach for a substantial length of time.
Jim Hupy
Salem, Oregon
> I can not find the part numbers for rear wheel bearings anywhere in my
> manual 1978 Eleganza. Can I get some help please?
> Thanks
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
remove and thoroughly clean your old bearings, and read the numbers off of
them along with the brand name, (best way)
And the second would be, to look in the GMC parts manual (not the
shop repair manual) and find the number there.
Or join GMCMI and look in their parts publications that is updated
annually or nearly that. Probably a good suggestion if you plan on keeping
your coach for a substantial length of time.
Jim Hupy
Salem, Oregon
> I can not find the part numbers for rear wheel bearings anywhere in my
> manual 1978 Eleganza. Can I get some help please?
> Thanks
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
Hank,
You don't say which, but it doesn't matter much as all the numbers are in the GMCMI interchange book.
Timken
LM-501349
LM-501310
LM-15103-S
LM-15243
Seal
CR21771-4 Best to read about this in the interchange book as many parts in the box by number are wrong.
Matt
--
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
You don't say which, but it doesn't matter much as all the numbers are in the GMCMI interchange book.
Timken
LM-501349
LM-501310
LM-15103-S
LM-15243
Seal
CR21771-4 Best to read about this in the interchange book as many parts in the box by number are wrong.
Matt
--
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
Thanks Jim.
I agree with you on the best way but with shortages in everything I would rather not tear apart and have to put back together old bearings.
I am a member of GMCMI. With over 5 GB worth of reference material I didn't see or know where to look for the part numbers.
I agree with you on the best way but with shortages in everything I would rather not tear apart and have to put back together old bearings.
I am a member of GMCMI. With over 5 GB worth of reference material I didn't see or know where to look for the part numbers.
Much appreciated Matt!
I'm a novice to this vehicle repair stuff having mainly worked on production manufacturing equipment (screw machines, lathes, etc...)
Henry
I'm a novice to this vehicle repair stuff having mainly worked on production manufacturing equipment (screw machines, lathes, etc...)
Henry
Go to our web site as we stock all.
If your in a hurry, have our staff send you over to me and I will get the
correct # for you.
Also if your need ing tech advise call and ask for me as I return ALL calls.
> Much appreciated Matt!
> I'm a novice to this vehicle repair stuff having mainly worked on
> production manufacturing equipment (screw machines, lathes, etc...)
>
> Henry
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk
http://www.gmcrvparts.com
1-800-752-7502
If your in a hurry, have our staff send you over to me and I will get the
correct # for you.
Also if your need ing tech advise call and ask for me as I return ALL calls.
> Much appreciated Matt!
> I'm a novice to this vehicle repair stuff having mainly worked on
> production manufacturing equipment (screw machines, lathes, etc...)
>
> Henry
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk
http://www.gmcrvparts.com
1-800-752-7502
Thank you Jim. I appreciate your offer of assistance.
Henry
> Go to our web site as we stock all.
> If your in a hurry, have our staff send you over to me and I will get the
> correct # for you.
> Also if your need ing tech advise call and ask for me as I return ALL calls.
>
>
> > Much appreciated Matt!
> > I'm a novice to this vehicle repair stuff having mainly worked on
> > production manufacturing equipment (screw machines, lathes, etc...)
> >
> > Henry
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> >
>
>
> --
> Jim Kanomata ASE
> Applied/GMC, Newark,CA
> jimk
> http://www.gmcrvparts.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
Henry
> Go to our web site as we stock all.
> If your in a hurry, have our staff send you over to me and I will get the
> correct # for you.
> Also if your need ing tech advise call and ask for me as I return ALL calls.
>
>
> > Much appreciated Matt!
> > I'm a novice to this vehicle repair stuff having mainly worked on
> > production manufacturing equipment (screw machines, lathes, etc...)
> >
> > Henry
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> >
>
>
> --
> Jim Kanomata ASE
> Applied/GMC, Newark,CA
> jimk
> http://www.gmcrvparts.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
