Rear Wheel Bearings

marlene meineken

New member
Aug 10, 1999
1,859
0
0
Thanks Guys
We got seal removed finally. The bearings look good no discoloration,no pits
or gouges on bearings or race and there was lots of grease inside. Anything
else we should look for?
Greasing with Mobil 1 synthic but now have to go to town this next week to
to buy 4 new seals.
Marlene Meineken
 
We are still working on our rear wheel bearings as had to go to town to get
4 new seals. Found the seals at Napa. Our Bearings look fine but decided to
buy an extra set to have on hand. Napa had the Inner Bearing as well as the
cup as a set the # was 35 all markings on bearing correspond to #s posted in
the past. Napa does not have any reference for the Outer Bearings or cup.
In fact went so far as to tell us that the bearing and cup was no longer
made
We went to a local independent and found the outside bearing and cup. The
brand is BCA Federal but I think we over paid cost about $32.00 for bearing
& cup. But at least we now have an extra set in our parts supply.
Paid $18.00 for the inner set.
Marlene Meineken