is there any housing that will fit over the original rear roof market lights. I was washing the roof and they broke when I ran the brush Over them. Talk about brittle
Rear roof marker light
- Thread starter HLuna
- Start date
Do a Google search for 99063R for the red lenses, 99063Y for the yellow. Available on EBay, NAPA online, etc. They are relatively cheap, so I went ahead and bought a whole set of new lenses - Looks great! While I was at it, I cleaned up the bulb contacts and made new gaskets out of 1/8" closed-cell Neoprene foam (EBay), using the old gasket as a template. Fun, rewarding project.
Do NOT fall for the newer LED look-alikes - I bought a set and they have a different mounting scheme which would have to be bolted from the INSIDE of the roof. Also, they are not well-sealed against water infiltration (made in China), so water settles in the base and will eventually short out the LED circuit board.
Do NOT fall for the newer LED look-alikes - I bought a set and they have a different mounting scheme which would have to be bolted from the INSIDE of the roof. Also, they are not well-sealed against water infiltration (made in China), so water settles in the base and will eventually short out the LED circuit board.
Last edited:
HLuna,
Grote makes the LED ones that are the same mounting as the OE. You just have to be careful to bed them well in butyl rubber so they don't leak.
Matt
Grote makes the LED ones that are the same mounting as the OE. You just have to be careful to bed them well in butyl rubber so they don't leak.
Matt
Hi Matt. Do you know the proper model number for the correct Grote lamps? I've seen a few options - all with the incorrect holes. Appreciate the help.
Don
Red LED lights
Orange LED lights
You might consider new stainless screws with a small rubber o-ring. Be sure to seal really well around the base of the light as well.
Orange LED lights
You might consider new stainless screws with a small rubber o-ring. Be sure to seal really well around the base of the light as well.
