Rear Panel Rusted Screws

[Melbo]

The rear panel on my 73 has rusted screws and I would like to replace them with stainless steel screws. I have removed the inside panel and
discovered the screws are threaded into the fiberglass panel. Before I do something wrong and damage something I will regret I thought that I would
ask what is the best way to remove them. I was going to spray them with some penetration solution but I was unsure what kind to use. Any useful
information would be greatly appreciated.

Melbo
--
Albuquerque NM Bus Conversion 1978 MCI 1973 GMC

 

[powwerjon]

Jim B has a tutorial on his website on how to R&R the rear screw assemblies and he and Jim K have the correct replacement units to do it right. Call either Jim’s in the morning and get the help you need.

JR Wright

>
> The rear panel on my 73 has rusted screws and I would like to replace them with stainless steel screws. I have removed the inside panel and
> discovered the screws are threaded into the fiberglass panel. Before I do something wrong and damage something I will regret I thought that I would
> ask what is the best way to remove them. I was going to spray them with some penetration solution but I was unsure what kind to use. Any useful
> information would be greatly appreciated.
>
> Melbo
> --
> Albuquerque NM Bus Conversion 1978 MCI 1973 GMC
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org