Does anyone knows anyone making the reaction arm setup for drum brakes?
thanks
--
1974 GMC Sequoia 26'
thanks
--
1974 GMC Sequoia 26'
Reaction Arm Drum Brakes
- Thread starter grant schaffer
- Start date
IIRC, Tom Pryor's reaction arm setup works with either drums or discs.
Check with JimK; I think he sells it.
Ken H.
On Mon, Mar 15, 2021 at 8:24 PM Grant Schaffer
wrote:
> Does anyone knows anyone making the reaction arm setup for drum brakes?
> thanks
> --
> 1974 GMC Sequoia 26'
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
Check with JimK; I think he sells it.
Ken H.
On Mon, Mar 15, 2021 at 8:24 PM Grant Schaffer
wrote:
> Does anyone knows anyone making the reaction arm setup for drum brakes?
> thanks
> --
> 1974 GMC Sequoia 26'
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
We market them for Tom Pryor,
You can go to our website and also call me.
I do return ALL calls
On Mon, Mar 15, 2021 at 6:37 PM Ken Henderson
wrote:
> IIRC, Tom Pryor's reaction arm setup works with either drums or discs.
> Check with JimK; I think he sells it.
>
> Ken H.
>
>
> On Mon, Mar 15, 2021 at 8:24 PM Grant Schaffer
>
> > Does anyone knows anyone making the reaction arm setup for drum brakes?
> > thanks
> > --
> > 1974 GMC Sequoia 26'
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.gmcrvparts.com
1-800-752-7502
You can go to our website and also call me.
I do return ALL calls
On Mon, Mar 15, 2021 at 6:37 PM Ken Henderson
wrote:
> IIRC, Tom Pryor's reaction arm setup works with either drums or discs.
> Check with JimK; I think he sells it.
>
> Ken H.
>
>
> On Mon, Mar 15, 2021 at 8:24 PM Grant Schaffer
>
> > Does anyone knows anyone making the reaction arm setup for drum brakes?
> > thanks
> > --
> > 1974 GMC Sequoia 26'
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.gmcrvparts.com
1-800-752-7502
Jim
I have been on the phone with Nick and just spent a couple thousand on a final drive liked slip and mirrors and conversation were you are out stock of
the reaction arm. So now I am looking and new drums and brake lines will be finished next week.
--
1974 GMC Sequoia 26'
I have been on the phone with Nick and just spent a couple thousand on a final drive liked slip and mirrors and conversation were you are out stock of
the reaction arm. So now I am looking and new drums and brake lines will be finished next week.
--
1974 GMC Sequoia 26'
Ah Grant, I am not sure that I am the person that you are looking for. I do
not make any reaction arm pieces. I have installed a bunch of them, as well
as well as 1 ton front ends, and disc brake conversions. But, I don't make
any of it. I do stock torsion bars that Peter Huber and I had made by a
company in California. I stock them to avoid having to charge for shipping
and California Sales taxes.
Manny Traveo makes a reaction arm system, and I believe that Jim K. sells
them. I am not positive about this, but Nick should be able to tell you.
Jim Hupy
Salem, Oregon
> Jim
> I have been on the phone with Nick and just spent a couple thousand on a
> final drive liked slip and mirrors and conversation were you are out stock
> of
> the reaction arm. So now I am looking and new drums and brake lines will
> be finished next week.
> --
> 1974 GMC Sequoia 26'
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
not make any reaction arm pieces. I have installed a bunch of them, as well
as well as 1 ton front ends, and disc brake conversions. But, I don't make
any of it. I do stock torsion bars that Peter Huber and I had made by a
company in California. I stock them to avoid having to charge for shipping
and California Sales taxes.
Manny Traveo makes a reaction arm system, and I believe that Jim K. sells
them. I am not positive about this, but Nick should be able to tell you.
Jim Hupy
Salem, Oregon
> Jim
> I have been on the phone with Nick and just spent a couple thousand on a
> final drive liked slip and mirrors and conversation were you are out stock
> of
> the reaction arm. So now I am looking and new drums and brake lines will
> be finished next week.
> --
> 1974 GMC Sequoia 26'
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
Get the kit Jim K sells, there is a drum specific and a disc specific with minor but essential changes between them. I've fitted two, both to drum
brakes. First one took a couple of days, second one in a day. If I had new drums, bearings, and seals, I'd hold them till the arm kit got there,
since the backing plate and hardware has to come off for the install. They're worth the work.
--johnny
--
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
brakes. First one took a couple of days, second one in a day. If I had new drums, bearings, and seals, I'd hold them till the arm kit got there,
since the backing plate and hardware has to come off for the install. They're worth the work.
--johnny
--
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
Thanks Johnny little to late for that everything is new in the back. Working on the brake lines now then done. I heard some where it all has to come
apart to install the reaction arm. Not sure I am interested now in re hashing all that work again.
--
1974 GMC Sequoia 26'
apart to install the reaction arm. Not sure I am interested now in re hashing all that work again.
--
1974 GMC Sequoia 26'
Let me suggest you drive a coach with and one without. I suspect that will convince you to make the effort. Or have a look at the vid on JimK's
site.
--johnny
--
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
site.
--johnny
--
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
I have a Reaction Arm drum drum kit I purchased from Jim a few years ago and never got around to installing. It looks very heavy duty and would have
worked well but now it sits unused in my attic since I went to intermediate disks in the back. The kit is available for sale at a good price now that
I need the attic emptied of my GMC surplus parts.
--
Richard
76 Palm Beach
SE Michigan
www.PalmBeachGMC.com
Coop Roller Cam 455, Howell TBI + EBL, 3.42 FD, Quadra Bag, Macerator, Lenzi stuff, Manny Tranny etc.
worked well but now it sits unused in my attic since I went to intermediate disks in the back. The kit is available for sale at a good price now that
I need the attic emptied of my GMC surplus parts.
--
Richard
76 Palm Beach
SE Michigan
www.PalmBeachGMC.com
Coop Roller Cam 455, Howell TBI + EBL, 3.42 FD, Quadra Bag, Macerator, Lenzi stuff, Manny Tranny etc.
> I have a Reaction Arm drum drum kit I purchased from Jim a few years ago and never got around to installing. It looks very heavy duty and would
> have worked well but now it sits unused in my attic since I went to intermediate disks in the back. The kit is available for sale at a good price
> now that I need the attic emptied of my GMC surplus parts.
Richard,
You just talk to JimK or TomP and buy the parts to use it with the disks in the intermediate.
Matt
--
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
> have worked well but now it sits unused in my attic since I went to intermediate disks in the back. The kit is available for sale at a good price
> now that I need the attic emptied of my GMC surplus parts.
Richard,
You just talk to JimK or TomP and buy the parts to use it with the disks in the intermediate.
Matt
--
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
> > I have a Reaction Arm drum drum kit I purchased from Jim a few years ago and never got around to installing. It looks very heavy duty and
> > would have worked well but now it sits unused in my attic since I went to intermediate disks in the back. The kit is available for sale at a good
> > price now that I need the attic emptied of my GMC surplus parts.
>
> Richard,
>
> You just talk to JimK or TomP and buy the parts to use it with the disks in the intermediate.
>
> Matt
Thanks for the info, but I'm guessing that will not work as I have Lenzi's disk brake system on the intermediate wheels. He uses a different (his own
design) backing plate etc. to mount Ford F350 rotors and calipers.
--
Richard
76 Palm Beach
SE Michigan
www.PalmBeachGMC.com
Coop Roller Cam 455, Howell TBI + EBL, 3.42 FD, Quadra Bag, Macerator, Lenzi stuff, Manny Tranny etc.
> > would have worked well but now it sits unused in my attic since I went to intermediate disks in the back. The kit is available for sale at a good
> > price now that I need the attic emptied of my GMC surplus parts.
>
> Richard,
>
> You just talk to JimK or TomP and buy the parts to use it with the disks in the intermediate.
>
> Matt
Thanks for the info, but I'm guessing that will not work as I have Lenzi's disk brake system on the intermediate wheels. He uses a different (his own
design) backing plate etc. to mount Ford F350 rotors and calipers.
--
Richard
76 Palm Beach
SE Michigan
www.PalmBeachGMC.com
Coop Roller Cam 455, Howell TBI + EBL, 3.42 FD, Quadra Bag, Macerator, Lenzi stuff, Manny Tranny etc.
