Q. for Wally

wally anderson

New member
Dec 21, 2005
1,016
0
0
> Hey Wally,,,, you makin that new tank a little taller for a bit more poop capacity????

Oh yes, should be about 38 gallons. Need that black tank to have more capacity than fresh tank. Talked to Dale Ropp and his FRP black tank is 40
gallons and has 120 and 12 volt heaters.
Matt Colie is my fiberglass mentor.
Working on top fittings right now and stalled at the bathroom 2" connection. That one has a O ring that seals on the pipe for a slip fit. I found it
has 2" straight pipe thread and won't fit the bung I made with taper thread. Interesting that it appears to have a GM part number on it. The other two
connection are taper pipe thread.
--
Wally Anderson
Omaha NE
75 Glenbrook
Megasquirt III injection
Bob Stone hydroBOOOOST
Manny reaction arm system
Branscombe Kelsey Hayes park brake
http://wallyandsue.blogspot.com/
 
Wally,
> Talked to Dale Ropp and his FRP black tank is 40
> gallons and has 120 and 12 volt heaters.

do you have a link or description to this black tank? With the idea to
get a 23 footer to Europe, a heated black tank is a must

--
Best regards

Peer Oliver Schmidt
PGP Key ID: 0x83E1C2EA

'76a Eleganza II, VA
 
> Wally,
> > Talked to Dale Ropp and his FRP black tank is 40
> > gallons and has 120 and 12 volt heaters.
>
> do you have a link or description to this black tank? With the idea to
> get a 23 footer to Europe, a heated black tank is a must
>
>
> --
> Best regards
>
> Peer Oliver Schmidt
> PGP Key ID: 0x83E1C2EA
>
> '76a Eleganza II, VA
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Dale built it himself and told of it in a West System epoxy seminar at a GMCMI rally. Don't know of any pictures or links.
--
Wally Anderson
Omaha NE
75 Glenbrook
Megasquirt III injection
Bob Stone hydroBOOOOST
Manny reaction arm system
Branscombe Kelsey Hayes park brake
http://wallyandsue.blogspot.com/
 
You could maybe find a waterbed heater at the thrift store or elsewhere and contact cement it to the bottom of the tank. Cheap when new and
thermostatically controlled, but will need 110V to operate...probably could be powered from a decent inverter though, and only about a 16th inch
thick.
--
Terry Kelpien

ASE Master Technician

73 Glacier 260

Smithfield, Va.