Every time I've pulled the trans. I also was changing the FD at the same time. Seems to me that it should be simpler not pulling FD. Bob Dunahugh
Pulling just the trans, and not the FD with it In Barb's 73.
- Thread starter Bob Dunahugh
- Start date
It is easier as you don’t have to remove the axles. Just be careful that you don’t mess up the gasket between the transmission and the final drive when pulling up the transmission.
Emery Stora
77 Kingsley
Frederick, CO
>
> Every time I've pulled the trans. I also was changing the FD at the same time. Seems to me that it should be simpler not pulling FD. Bob Dunahugh
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Emery Stora
77 Kingsley
Frederick, CO
>
> Every time I've pulled the trans. I also was changing the FD at the same time. Seems to me that it should be simpler not pulling FD. Bob Dunahugh
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Bob, sometimes I'm slow to catch on to simple abbreviations. What is the
"FD?"
Thanks,
Vern
> Every time I've pulled the trans. I also was changing the FD at the same
> time. Seems to me that it should be simpler not pulling FD. Bob Dunahugh
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Vern Crawford
2013-2014 Past-President
Hill Country Chapter http://txmn.org/hillcountry/
Texas Master Naturalist
155 J-J Lane
Center Point, TX 78010
(830) 634-2576 home
(618) 203-8296 cell
VernCrawford
[image: Texas Master Naturalist_small]
"FD?"
Thanks,
Vern
> Every time I've pulled the trans. I also was changing the FD at the same
> time. Seems to me that it should be simpler not pulling FD. Bob Dunahugh
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Vern Crawford
2013-2014 Past-President
Hill Country Chapter http://txmn.org/hillcountry/
Texas Master Naturalist
155 J-J Lane
Center Point, TX 78010
(830) 634-2576 home
(618) 203-8296 cell
VernCrawford
[image: Texas Master Naturalist_small]
I think Emory answered my novice question.
FD=Final Drive
Thanks,
Vern
> I have done it both ways. Leaving the FD in the coach is much easier and
> quicker.
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Vern Crawford
2013-2014 Past-President
Hill Country Chapter http://txmn.org/hillcountry/
Texas Master Naturalist
155 J-J Lane
Center Point, TX 78010
(830) 634-2576 home
(618) 203-8296 cell
VernCrawford
[image: Texas Master Naturalist_small]
FD=Final Drive
Thanks,
Vern
> I have done it both ways. Leaving the FD in the coach is much easier and
> quicker.
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Vern Crawford
2013-2014 Past-President
Hill Country Chapter http://txmn.org/hillcountry/
Texas Master Naturalist
155 J-J Lane
Center Point, TX 78010
(830) 634-2576 home
(618) 203-8296 cell
VernCrawford
[image: Texas Master Naturalist_small]
Is "FD" listed here? I can't remember.
http://bdub.net/GMC_Jargon.htm
-----Original Message-----
From: Vern Crawford
Sent: Saturday, April 8, 2017 12:28
Bob, sometimes I'm slow to catch on to simple abbreviations. What is the "FD?"
Thanks,
Vern
http://bdub.net/GMC_Jargon.htm
-----Original Message-----
From: Vern Crawford
Sent: Saturday, April 8, 2017 12:28
Bob, sometimes I'm slow to catch on to simple abbreviations. What is the "FD?"
Thanks,
Vern
> Is "FD" listed here? I can't remember.
>
> http://bdub.net/GMC_Jargon.htm
Glad you are doing a little bit better, Billy.
You're back in "help-modus" ...
Keep it calm and don't overstress it ....
Daniel
--
Daniel Jacobs, No GMC, but an admirer of them .... We'll see what the future brings ....
Always remember, the world is full of nice people!
So, if you can't find one, be one!
>
> http://bdub.net/GMC_Jargon.htm
Glad you are doing a little bit better, Billy.
You're back in "help-modus" ...
Keep it calm and don't overstress it ....
Daniel
--
Daniel Jacobs, No GMC, but an admirer of them .... We'll see what the future brings ....
Always remember, the world is full of nice people!
So, if you can't find one, be one!
> Is "FD" listed here? I can't remember.
>
> http://bdub.net/GMC_Jargon.htm
No
--
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
>
> http://bdub.net/GMC_Jargon.htm
No
--
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
Thanks, Dan. I'm on the way. I know it's gonna be a while, but I'm workin on
it.
bdub
-----Original Message-----:08 PM
To: gmclist
Subject: Re: [GMCnet] Pulling just the trans, and not the FD with it In Barb's
73.
> Is "FD" listed here? I can't remember.
>
> http://bdub.net/GMC_Jargon.htm
Glad you are doing a little bit better, Billy.
You're back in "help-modus" ...
Keep it calm and don't overstress it ....
it.
bdub
-----Original Message-----:08 PM
To: gmclist
Subject: Re: [GMCnet] Pulling just the trans, and not the FD with it In Barb's
73.
> Is "FD" listed here? I can't remember.
>
> http://bdub.net/GMC_Jargon.htm
Glad you are doing a little bit better, Billy.
You're back in "help-modus" ...
Keep it calm and don't overstress it ....
Billy,
We're all pulling for you!
Ken H.
> Thanks, Dan. I'm on the way. I know it's gonna be a while, but I'm
> workin on
> it.
>
> bdub
>
>
> -----Original Message-----:08 PM
> To: gmclist
> Subject: Re: [GMCnet] Pulling just the trans, and not the FD with it In
> Barb's
> 73.
>
> > Is "FD" listed here? I can't remember.
> >
> > http://bdub.net/GMC_Jargon.htm
> Glad you are doing a little bit better, Billy.
> You're back in "help-modus" ...
>
> Keep it calm and don't overstress it ....
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
We're all pulling for you!
Ken H.
> Thanks, Dan. I'm on the way. I know it's gonna be a while, but I'm
> workin on
> it.
>
> bdub
>
>
> -----Original Message-----:08 PM
> To: gmclist
> Subject: Re: [GMCnet] Pulling just the trans, and not the FD with it In
> Barb's
> 73.
>
> > Is "FD" listed here? I can't remember.
> >
> > http://bdub.net/GMC_Jargon.htm
> Glad you are doing a little bit better, Billy.
> You're back in "help-modus" ...
>
> Keep it calm and don't overstress it ....
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
I know, ... and it means more than you all can imagine.
Thank you
bdub
-----Original Message-----Sent: Saturday, April 8, 2017 9:11 PM
To: gmclist
Subject: Re: [GMCnet] Pulling just the trans, and not the FD with it In Barb's
73.
Billy,
We're all pulling for you!
Ken H.
Thank you
bdub
-----Original Message-----Sent: Saturday, April 8, 2017 9:11 PM
To: gmclist
Subject: Re: [GMCnet] Pulling just the trans, and not the FD with it In Barb's
73.
Billy,
We're all pulling for you!
Ken H.
You are the guy
Big guy
Be well
Gene
> I know, ... and it means more than you all can imagine.
>
> Thank you
> bdub
>
> -----Original Message-----Sent: Saturday, April 8, 2017 9:11 PM
> To: gmclist
> Subject: Re: [GMCnet] Pulling just the trans, and not the FD with it In
> Barb's
> 73.
>
> Billy,
>
> We're all pulling for you!
>
> Ken H.
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://bdub.net/gmcmotorhome.info/
Alternator Protection Cable
http://bdub.net/gmcmotorhome.info/APC.html
Big guy
Be well
Gene
> I know, ... and it means more than you all can imagine.
>
> Thank you
> bdub
>
> -----Original Message-----Sent: Saturday, April 8, 2017 9:11 PM
> To: gmclist
> Subject: Re: [GMCnet] Pulling just the trans, and not the FD with it In
> Barb's
> 73.
>
> Billy,
>
> We're all pulling for you!
>
> Ken H.
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://bdub.net/gmcmotorhome.info/
Alternator Protection Cable
http://bdub.net/gmcmotorhome.info/APC.html
Yeah Billy. We have lost too many great GMC'rs over the years and will lose more in the coming years. With the GMC owners age profile there is no
getting around it. HOWEVER we don't need to lose any before their time.
Get well soon. Listen to the Docs and PT persons. Do just what they say. No more, no less.
--
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
getting around it. HOWEVER we don't need to lose any before their time.
Get well soon. Listen to the Docs and PT persons. Do just what they say. No more, no less.
--
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
