Propane tank - how heavy is it?

My 23' tank wasn't that heavy, but to clear the door it has to be turned and moved, kind of like a chinese puzzle. It >will< go in and out with a bit
of thought. My 26' was rehabbed by the PO, but looks much the same. It's easier with the valves and protrusions off.

--johnny

--
'76 23' transmode Norris upfit, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
"The road goes on forever, and the party never ends" --Robert Earl Keen
 
Armand
It is an easy job just disconnect the tank and drag it out till one end is on the ground then swing the other end out . Put it back in the same way.
It would be a good time to cover the floor of the space with sheet metal while you have it out.
--
Roy Keen
Minden,NV
76 X Glenbrook
 
I pulled mine years ago. It was not empty or full. I did not have a weight problem removing or reinstalling it by myself. While it was out I
repainted the cabinet floor and also the entire tank with rustoleum gray.

I do not know the actual weight of mine.

Propane inside it weighs 4.2 pounds per gallon.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
 
You must log in or register to reply here.
GMCMI Fall 2026 Rally
Applied GMC

Share this page

Share this page
Top Bottom
Back