Pleated shade installation

[wayne newland]

I received a new set of day/night shades from Guske Sales.

I have a 75 Palm Beach with 4 piece inside window trim. According to
the instructions supplied by Guske, the upper brackets are to go under
the upper trim piece. Anyone out there installed these with the 4
piece trim? I have painted the trim and removing it to install the
brace is a pain. The Guske's apparently are traveling (what a way to
make a living) so I can't ask them.

Any experience will help

Wayne Newland F9300 75 Palm Beach

 

[mr.c]

When I put in my Guske shades, I used the same location of the original
blinds and they went just fine. I don't understand your question. If you
want to call me, I installed a full set in my coach.

Al Chernoff 505-821-0693

Al Chernoff
77 Eleganza II

 

[loren \(skip\) newhouse]

> I received a new set of day/night shades from Guske Sales.
>
> ................. the upper brackets are to go under
> the upper trim piece.

Hi Wayne,

I'm in the process of installing the E-Z Lift Pleated Shades from Guske's.
I also have the 4 piece window trim. The installation instructions state
to "Install brackets above top of window frame. Mount brackets
approximately 3" in from corner of window frame. I just abutted the
bracket edge to the top of the trim and drilled the mounting holes. It
worked for me.
Skip
'75 Avion in Western MD


>

 

[wayne newland]

Skip

Thanks. (Read the instructions 14 times, try all of the possible
combinations 3 times and drill once) I had been reading the instructions for
the door.

Wayne

>
> > I received a new set of day/night shades from Guske Sales.
> >
> > ................. the upper brackets are to go under
> > the upper trim piece.
>
> Hi Wayne,
>
> I'm in the process of installing the E-Z Lift Pleated Shades from Guske's.
> I also have the 4 piece window trim. The installation instructions state
> to "Install brackets above top of window frame. Mount brackets
> approximately 3" in from corner of window frame. I just abutted the
> bracket edge to the top of the trim and drilled the mounting holes. It
> worked for me.
> Skip
> '75 Avion in Western MD
>
> >